Nein. Wenn du 2-Wege möchtest, dann sollte mindestens ein von den Geräten (Audio Master / Video Master) mit Zweiwege-Kommunikation ausgerüstet sein. Als Foxtrott sagt, kann mann die BL7000 mittels eine Rekonfiguration für Einweg einstellen. Aber dann wäre wohl ein Beo4 mehr sinnvoll.

This depends on which version of Beolink 1000 you have. I think this is covered elsewhere in this forum, but in order to simplify things - here is my cheat sheet: Beo 4 Beolink1000 MkI & II Beolink 1000 MkIII & IV [red] [SHIFT] [<] [SHIFT] [\/] [blue] [SHIFT] [>] [SHIFT] [/\] [green] [SHIFT] [<<] [SHIFT] [<<] [yellow] [SHIFT

Yes, it's the INDEX button. I happen to own one of these rare terminals, but I don't have the CD player to go with it. I would expect the INDEX button to allow direct selection of a CD index number within a track.

Hmm, interesting. There must clearly be a difference in software versions here. [quote user="tournedos"]If the software in your Beosystem 2500 was only prepared for 1-way communications, it probably ignores two-way commands completely.[/quote] My Beosystem 2500 is a late two-way system (1994, S/W 1.8) and it works perfectly well with both

I'd be surprised if it's possible at all. While the Beocenter 9500 is capable of two-way communication, it is only intended to be controlled by the Beolink 5000 and Beolink 7000 (and all one-way remotes, of course). The MCP6500 uses a different data link address than the BL5000 and BL7000. I've tried to use the MCP6500 with a Beosystem 2500

I'm a bit intrigued by your wish to avoid the link-kit (by which I understand you mean the Beolink Active). I have something of the same problem, as I have just acquired a pair of Beolab 1 speakers, which I want to use for a special music listening position in a rather smallish room which already has a pair of Beolab 4000 placed in a bookshelf.

I've noted that there was an N.TV command (hex 0x84) introduced in the Beo5 configuration tool v3.23 (2009-09-08). No smoke without fire...

Kommunikationen är via tvåvägs infraröd länk (455 kHz). Felmeddelandet "No connect" är typiskt när man försöker använda en gammal tvåvägs B&O-fjärrkontroll med ett modernare envägs B&O-system. Men det är ju inte det som är problemet i ditt fall. Antagligen