|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
You must first configure the front speakers left and right. Afterwards, it is possible to configure surround. But perhaps only, when you have a center. So the BL3 might only be configured as rear left/right (not surround left/right) unless you have a center. Surround is defined as 5.1 or 7.1, hence you might need a center (.1).
-
It is a SW bug! I had the same issue and my dealer did an update. But we both believe, that it wasn't a good idea. See also SW thread in this forum. Unpluggin works mostly. DO NOT UPDATE YET! Wait a few months. The current SW version has more problems than a blinking LED in standby (ie fan noise).
-
The center is like the master. It can be set by changing the distance AND there is a switch on the rear of the beolab 7-4 to adjust the distance to a wall. You might want to check this out. The position switch is to be set to F (free) when the distance of the frontgrill to the wall is more than 50cm. Set it to W (wall) when the distance is less than
-
Hat jemand Erfahrungen mit dem Lichtdimmer von Lintronic (mit Beo4) und dimmbaren Energiesparlampen? http://www.lintronic.dk/aludim.htm bspw. Osram oder Philips: http://www.osram.ch/osram_ch/DE/Consumer_Produkte/Beleuchtung_fuer_Zuhause/Energiesparlampen/Produktuebersicht/Intelligente_Energiesparlampen/OSRAM_DULUX_EL_DIM/index.html Eine Anfrage beim
-
Hi all this is a known issue. If you can read german, try my post here: http://forum.beoworld.org/forums/t/29303.aspx 26 Oct 2009 9:32 PM and newer. It is because: - masterlink only supports analog audio (hence this is why you have to connect a scart/cinch from a setop box to your BV, HDMI doesn't bring the audio onto masterlink) - I think you have
-
Hallo Stefan, mein Dealer hat 7.05 (551) nun sauber installiert, keine roten Texte mehr (es hat etwas länger gedauert, da im Power-Supply noch etwas ersetzt werden musste). Die rote LED blinkt nicht mehr im Standby. Bezgl. Lüftergeräusch kann man geteilter Meinung sein. Wenn man auf stumm schaltet, sind diese etwas besser hörbar
-
Perhaps you have to configure also the asus to 'send' the audio through HDMI (instead of SPDIF or analog). At the BV7 there is just to select the HDMI A/B/C/D and also select HDMI for sound. You are right, HDMI supports both. I have a Western Digital TV HD live connected by (only) HDMI and got audio and video. (but the WD doesn't give digital
-
Ich rate Dir, den externen digital Receiver gegen einen externen digitalen HD Recorder zu ersetzen. Über das DVB-HD Modul habe ich hier im Forum noch nichts wirklich gutes gelesen. Zudem könntest Du mit dem Recorder auch aufnehmen, Pause usw was schon toll ist. B&O unterstützt mit der PUC Liste sehr viele Geräte damit Du diese
-
Hallo FRANK Ich kann Dein Frust verstehen. Ich hatte das selbe Problem und die Lösungsbeschreibung im erwähnten Link ist von mir. Aber, es gibt zwei Probleme bei B&O, eines davon könnten sie einfach lösen, das andere nicht: A) Man muss von einer Settop Box oder ähnlich den Ton zusätzlich analog einspeisen (via SCART
-
Kann mir einer der Technisat Digicorder und Beo4 Nutzer die Tastenbelegung der Beo4 mit dem PUC angeben? Ich denke da an sowas wie hier: http://forum.beoworld.org/forums/p/17415/212243.aspx#212243 von Gerd
|
|
|