Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Thank you! :-) Before your answer I tried a lot of combination of shift and other buttons. But as it seems; never "Picture" ;-) Now it works fine. Then only little downside compared with "V-Tape 2" is that the MX does not start automatically when I start the DTV-decoder. But that is not important. Easy to just push "TV"
-
How do you configure a preset to use decoder? I have a MX7000 from 1992 (early one with the BL1000 remote)
-
Hi, I have managed to "destroy" the IR-reciever (when I repaired a transistor in the power PCB) of my 4500. The IR-recieverit works if I pull out the IR PCB from the system and aim carefully at the IR-diod. Any Idea how to fix it? I think I have checked the transistors, diods and capacitors properly.
-
Everything has worked fine for a couple of month but now the transceiver stops to work after approx 10-12 hours. The LED is not lit and doesnt respond to remote or button press I have to disconnect/reconnect the BS4500 from the powersupply/wall socket to get it work again.
-
Anyone that knows what might be the problem?: I have had a xtra speakers kit to my 4500-system for a couple of month without any problem - until a few days ago. After 10 to 12 hours the tranciever is dark and doesnt respond to button press or remote. When I disconnect/reconnect the power cords to the Beomaster 4500 all works fine again. Anyone with
-
I have had a xtra speakers kit to my 4500-system for a couple of month without any problem - until a few days ago. Sometimes the tranciever is dark and doesnt respond to button press or remote. When I disconnect/reconnect the power cords to the Beomaster 4500 all works fine again. Anyone with an idea? I have a junction box for lengthen the MCL-cable
-
Now I heve monted the D27TG05-06 that I bought from Madisound. Very easy buy and quick delivery over the Atlantic by the way. The crossovers in both the speakers are recaped and the speakers sounds very good! Thank for all support from everyone!
-
I have "recaped" the crossover with no luck. Swaped the driver with my healty 60.5 and it is playing beautiful! The faulty Vifa D26TG-05 06 ohm 008 aren't completely mute some very weak sound is coming from it. Now I put the god driver into the box with recaped crossover. Sounds lovely! Now I have to hunt for a replacement...
-
That's right! My configuration was the same as the drawing. The resistors are fine. Don't think I have the right equipment to measure the caps. I buy new ones and try, I think.
-
The Vifa tweeter was fine. A resistance of 5 ohm. The Woffers (one of them works as midrange) was Nokia by the way. I quickly looked at the crossover filter and didn't find which component was who... Almost like it wasn't the same filter as in the service manual... Have to have some more time. Had to go to work... :-) /Tony