Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
HI Try to unplug your 3200 from the mains let it be unplugged for 45 sec and plug it in again and see if it works if i do not work i don't remember if there is a backupbatteri inside the 3200 if there is try to change it Regards jan
-
hi then this solution wont work you have to get hold of b&0 box called i think mcl2av to connect to active speakers like bl8000 or an amp with variable pre amp output regards jan
-
HI the outer copper wire must go from your minijack's long metalpiece(ground)to pin 2 on your din connector and as far as i remember remember pin 1 and 4 on the dinconnector is signal out left and right and pin 3 and 5 are signal in left and right so the red wire must go from one of the inner connections on your minijack to pin 5 on the din connector
-
HI no the aux/tape2 connector on bc 9300 is a stereophonic that carries right and left channel out on pin 3 and 5 and pin 1 and 4 carries signal in for left and right channel the pin in the middle is common ground if you have a minjack in the other end you have to connect the terminals in the middle of the jack to pin 1 and 4 on the din connector and
-
Hi has the preamp two rca connections if it has its probely a normal line out thats carries a variable signal out and can be used directly on bl 8000 in line position regards jan why dont you just try
-
Hi puncher You may be right but as I cannot see the backpanel of the pioneer i dont know for sure but many amp's has a combinated pre out sub woofer connection regards jan
-
Hi Jan I am investigating the possibilities around your problem and will return a post to you when i hopefully have a solution regards jan
-
Hi Peter as you did not answer my last post I can suggest several possibilities try to use your tv/monitor button on your dvd remote if it do not work its possible that your dvd are configured to ntsc or auto and not able to send the right signal when your dvd is in stop mode,another possibility is that when you are in stop mode,the dvd do not send
-
Hej poulk Prøv knust fin pimpsten blandet med linolie men prøv først et sted hvor det ikke er synligt og gnub blødt mvh jan
-
Hi Remove it all and buy teak imitated selfadhersive plastic or go to a furniture rebuilder(dont know if it's the right word) og get some thin teak and glue it on regards jan