Steve and Jeff, thank you both very much for the kind offers. I look forward to receiving the tuning slide so that I can finish my project! Best regards, Peter

I still need the parts for my amplifier-tuner as Steve has been unable to help. Does anyone have a Beogram 3000-2 that does not work but is complete that they would be prepared to sell, please?

Craig, thank you for the offer. I intend to examine the speed change mechanism and will report back through this site. Regards, Peter

Peter, Thank you for the manual. Regards, Peter

Steve, Your description is very helpful and makes sense to me. I will diassasemble the speed change as best I can and try to spot the problem. There does not seem to be any movement in the fine speed control which I believe is the black knurled knob in the centre of the control. Regards, Peter

The deck starts slowly and runs at a single speed only but when the speed change control is increased the platter stops. The cam operating the drive raises the wheel but jams against the top of the motor shaft and stalls the motor. The Beogram 1000 manual on this site does not cover the problem area and the second manual is misfiled and applies to an

Steve, thank you for your help. I have sent you a PM. Regards, Peter

I need the front of a tuning slide for my 3000-2. They are parts 33, 34, 35 on the service manual diagram - 3302119, 3190026,3302110 The back and the wheels are present but not the front slide. In addition, moving the slide does not tune the FM stations but I will not know why untill I have it apart. I think that there should be a cover for the preset