|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
I have had exactly the same problem. Some times with the black bar as in your picture, some times the bar contained a lot of small lines in different collars. The good news is that it is possible to fix it. The bad news is that you can't fix it your self. My screen was less than a year, so I don't know how expensive it is to get it fixed. Good
-
Sidste chance inden det gives i bytte hos forhandler. Kr. 1500,-
-
Ny pris, nu kun kr. 1800,-
-
Hej. Jeg har et fejlfrit DVB T/S modul til overs. Det er til indbygning i Beosystem 3, nypris kr. 4000,- sælges for kr. 2200,- mv. André tlf. 29620571
-
Hi guys . Interesting discussions, but maybe you can agree on this, relative simple, question ;-) I have a Beovision4 (bs3 and panel D9) and use a PS3 to watch DVD and BR. Do you think that I will have any benefits going from my current sw 4.0 to 4.24 ? sw 4.0 is working very well, and if sw 4.24 is designed for panel D10 I may just get a more unstable
-
That is a very expensive test ;-) I don't have any beosound system. Karcenty
-
Yes, and I have tried different freq. as well. Karcenty
-
Have also been tried with no luck. Karcenty
-
It makes no difference. There is no connection between mx4000 and the BS3. If I hold down the red stop button in one room for 3-5 sec. it is only the TV in that room that turns off, normally both TV would turn off. It also makes no difference if I disconnect the Beolink Video, only reaction is "snow" on the screen. Well I think that I will
-
I checked and double checked every cable, I even made a new ML cable, but it make no difference. Maybe it is a hardware error. Karcenty.
|
|
|