Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
Page 1 of 1 (10 items)
-
Thanks again all. Transported the Avant on its back, angled to one side as suggested by vikinger and arrived in top shape. Very pleased as the last time I needed to transport my Avant 32, I asked B&O Covent Garden to do it which costed me around £200.
-
Thanks for all your replies. Some top advice there
-
Hi Graham - Your feedback is much appreciated. Think I will take a chance and if it breaks on the way back its a great excuse to upgrade. Thanks again
-
Hi all, Apologies if this has been covered in a previous post but I need to transport my Avant 28" from my flat to my house (around 45 minute journey). It does not fit in the car in an upright position so I will need to either lay it flat on its back or front. Any suggestions as to which way is less risky (in case of damaging components, etc.)
-
Completely agree Noah. I gave up and put it all back together again. Knowing how clumsy I can be, I didn't want to risk cocking it up!
-
OK so I've got the rear panel off. How do I get to the STB card? How many connectors do I have to remove to be able to pull the card out. Its looking like its going to be much more difficult than I thought. Is it the card that the grey cable for the IR is connected to? I know I'll have no problem with replacing the chip but for the moment I
-
Thanks for all your replies. My chip came this morning so I will be giving it a go tomorrow when my wife stops watching the TV!
-
Hi all, I have managed to get hold of a later STB chip for my Avant 32 and was wondering if this is an easy DIY job. My B&O dealer was quoting £180 to do the job but seeing as my Avant which I paid over £5k for is only worth about £100-200 now I thought I might as well have a go myself! Any suggestions gratefully received Thanks
-
Many thanks Peter - That has just sorted it all out. Fantastic!
-
Hi, Sorry if this is a simple one but I can't find the answer! I used to have 5 Beocom 6000 handsets registered to the same base. Due to two of the handsets going faulty in the last few years, I now have only three working handsets left. Only trouble is the faulty handsets are still showing as associated with the base. Whereas I know how to remove
Page 1 of 1 (10 items)