Hello Martin, thanks for answering to my question... [quote user="Die_Bogener"] Electronics and Software are identical.[/quote] This is what i wanted to ear So, since my MX3000 has the motorised motor connector fitted and the same MX5000 SW, i guess connecting a motorised base should work too. Is it right? I have a MS4107 (4 pin connector

Hi all, I recently bought a VX5000 from ebay and, even thought that it shouldn't work, I've tryed to connect it to my MX3000. Guess what? The VX5000 works perfectly in all its functions!! (advanced PIP functions too!!!). Obviously the channels dump doesn't. So why B&O 'Config guide' SW says that the PIP functions should not work

hello and thanks Stefan, this is really a bad notice for me... Much more if I think that it shold be possible (trough the BS4500 aux/datalink port and a beolink converter), just a software upgrade should do the job... bye

Hello guys, I have a BS4500 and two link rooms, one with BL3500 and the other with MCL2A, both with MCL cables. May I connect my PC in another room trough e.g. 'a beolink pc 2' and an 'ML/MCL' or another converter to listen PC music in link rooms? Thanks, onyx

Hi, please do you still have it all? I could be interested... Thanks

hi, try to rotate (just a little) the G2 regulation pot and watch to the screen if something appear...

hello, I think the belt isn't a so critical part (and usually service manuals doesn't mark them as critical), unless you ABSOLUTELY want original B&O spare parts, i guess the best solution is to try looking around for a close-to-match one (or more than one) and try that... As far as I see you have to take off the cord pulley, so pay attention

Hi all, as already has been written on this forum, SW greater than 2.0 is needed inside of the beomaster to obtain two way IR comms. I tried to contact the official B&O Service in my city asking for it and they confirmed the last version is 2.2 (PN 8341178) but it is not available anymore!! So I'm wondering if there is someone having it or at