My BV7 is MKII with single DVI input. I made cross checking: 1.connect a standard lcd PC screen to BV7 => same symptoms as the projector no picture 2.connect a PC to the projector with low def via VGA => the projector accept the input with no problem. According to these test the problem come from BV7, no ? Mat

Hi Beobuddy, Actually you are right I was trying combination "MENU" followed by the number or colour. But we can get the same result with "GO" so now it's fine Thanks. Only thing is if you forgot the combination you cannot check the shortcuts by pressing menu. Mat

Thanks for helping me. My BV7 is type 9312 with latest software and HR READY KIT installed. The projector is FULL HD (Panasonic PT-AE4000) but i tryed to "FORMAT 0" the DVD and my STB (SD source) and the symptoms are the same. Mat

Nothing. The "DVI setup" stays on screen.

Bjr, Je me pose exactement les memes questions que Facel. Voici ce que je desire faire: Commander: ecran projection + videoprojecteur + lumiere + climatisation. Je souhaiterai creer des macro cad qu'avec une seule touche l'ecran descende, le projecteur s'allume, que la TV se mette en P-MUTE, et la lumiere s'eteigne. Je ne souhaite pas

Hi Anderson, I know how to access to the Service Menu but I don't know where are the "Cinema Timing" menu. Which setting should I enter ? Thanks, Mat

My BV7 is quite old ; I have only DVI input. When I connect a TVIX 6500 and set correctly the STB I cannot get the menu shortcut on screen ! It shows a grey "DVI menu" and i can adjust brillance.... I tryed to connect the TVIX on V-MEM via scart, and it's ok it shows the menu shorcut. Anyone has the same problem ? Mat

Dear All, I have a BV7 on which I recently attached to a Panasonic PT-AE4000 projector. When I press "Format 0" the electronic curtain works then TV shows "wait" then nothing finally picture comes back on BV7. No signal on projector ! I tryed on different sources DTV, VMEM... and it's the same problem. Any idea ? Matthieu

Dear Keith, Thanks for your quick and clear response. Mat

Bjr, D'apres la liste des codes pour disponibles pour le PUC il y a 3 versions pour le M6500A, Je dois faire une maj de mon PUC. Lequel choisir ? TVIX HOMEMEDIA M6500A V1.00a TVIX STB M6500A V1.00a TVIX STB M6500A V.1.10a http://forum.beoworld.org/groups/stb-c_supported_products/default.aspx Mat