The B&O Beo5 remote is intended to compliment the Beo4 and not replace
it. It is a fully flexible and personalised remote control that can handle the
operation of any product combination, providing an individual solution for the
user. It can be adapted to the system setup, it adapts to the surrounding light
conditions and can be adapted to any users specific requirements.
Ease-of-use
through logical and intuitive operation introducing a new ONE Touch-and-Go
operation, yet the operation is based on principles most people are familiar
with from Beo4. Divided into two; a physical tactile operation on the ball in
combination with a programmable soft-touch operation on a glass display.
One-touch operation of the most important functions, and situation-dependent
operation.
The distinctive design is a combination of the square and the
circle in a three-dimensional solution that stands out no matter where you put
it. You can hold it firmly in your hand while accessing all functions with the
tip of your thumb. Beo5 is an extension of the operation principles most people
are familiar with and centred around the star shaped button, the arrow keys and
the volume wheel, which lie in the aluminium ball.
The new element is the
touch display, where you have three fixed soft keys (a bit of a contradiction)
which is all that is needed to operate the system. With Beo5 and the combination
of buttons on the ball and the soft-keys in the display, you now have almost
endless possibilities. You no longer have to have functions that are not
required for your system setup.
Key Specification Points
include:-
- Uses a Freescale MC9328MXS Processor
- Processor runs at 96 MHz and 16MHz in standby
- Battery capacity in Standby is 12 days
- Active time typical 18 hours ( 3 hours continually) Charging time 5 hours
- Battery Capacity is 1,350 mAh, 2.5V
- Charging via the USB is 5V at 90mA
- Charging via the adapter is 5V at 400mA
- Memory size allows for up to 100 logos, 100 icons, 24 zones. Fonts 7 fonts
(1 font in 7 colours)
- IR operation Beo4 IR protocol, Beo5 IR protocol, RC5, Bitstream, NEC and Raw
- 17 Hard keys plus wheel Soft keys
- IR Frequency Range 455 KHz and 2080 KHz and uses three (3) transmitting
diodes
- Power management Wake-up Alu-ball touch, key-press, display pressing, wheel
activation, placing in charger
- Power off Long press on centre key, low battery capacity alert when <10%
- Volume adjustment is carried out with the wheel Wheel functions Volume up,
volume down, mute
- Backlight Colour White Intensity Automatic adjusted to ambient light
- Timeout 2 step - dim and fadeout Factory set to 10 and 30 seconds
- Screen Type Delta-RGB, 234x960 pixels, normal black. Colour 16.777.216
colours. Contrast ratio 500 @ 25C (typ)