BV 7 says "WAIT" -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 11-05-2007 11:50 AM by mhh. 6 replies.

Page 1 of 1 (7 items)
	Sort Posts: Previous Next

11-05-2007 3:40 AM

mhh
Joined on 11-05-2007
Adelaide
Posts 6

BV 7 says "WAIT"

Reply Contact

My BV 7 shows "wait" in the top right corner (where the clock normally shows) and has a blank screen and won't respond to any commands from the remote. Has it died? Can anyone suggest a fix?

TIA

Mark

11-05-2007 3:46 AM In reply to

David
Joined on 05-05-2007
England
Posts 128

Re: BV 7 says "WAIT"

Reply Contact

Have you tried unplugging and re entering the pin code?

Beolab 8000, Beolab 6000, Beolab 2, LG CX65, Beosystem 3, Beosound 9000, Beolab 3500

11-05-2007 3:47 AM In reply to

mhh
Joined on 11-05-2007
Adelaide
Posts 6

Re: BV 7 says "WAIT"

Reply Contact

I've tried unplugging but all I get when I turn it back on is WAIT. Shouldn't it prompt for the PIN?

Edit: The screen is dead.

11-05-2007 4:01 AM In reply to

marcus_m
Joined on 04-16-2007
Bavaria
Posts 470

Re: BV 7 says "WAIT"

Reply Contact

Has the PIN been entered wrong? This could be the reason....

11-05-2007 4:47 AM In reply to

mhh
Joined on 11-05-2007
Adelaide
Posts 6

Re: BV 7 says "WAIT"

Reply Contact

marcus_m:
Has the PIN been entered wrong? This could be the reason....

Not by me, but the kids may have tried to enter the PIN after the unit was switched off. I guess I need to get a B&O tech to help.

11-05-2007 5:06 AM In reply to

meandmyshadow
Joined on 04-17-2007
Posts 339

Re: BV 7 says "WAIT"

Reply Contact

Leave it in standby for 3 hours, the pin protection circuit will then be reset and will allow you to re-enter it.

11-05-2007 11:50 AM In reply to

mhh
Joined on 11-05-2007
Adelaide
Posts 6

Re: BV 7 says "WAIT"

Reply Contact

Many thanks - waiting fixed it as you said it would. Smile

Page 1 of 1 (7 items)