in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 11-05-2011 9:39 AM by Leslie. 27 replies.
Page 1 of 2 (28 items) 1 2 Next >
Sort Posts: Previous Next
  • 09-20-2011 1:17 PM

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Parts for update - MPAV 9000

    Hi Beoworlders!

     

    I want to update my MPAV 9000 a little bit, so I’m looking for following parts:

    - Front piece (BC 2300)

    - Large Clamper, Polished (BS 3200)

    - RDS Module (BC 2300/2500, BS Ouverture, MPAV 9000)

    - SW 1.2 (Or higher?) (MPAV 9000)

    - Wall Bracket (BC 2300/2500, BS Ouverture, MPAV 9000 etc.)

    I’m in Denmark, and with postage in mind I would prefer parts from Europe.   

    Send me a PM if you have one or more of the parts.

    Best regards

    Dennis Smile

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 09-28-2011 11:24 AM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Bump! Smile

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 10-08-2011 1:48 PM In reply to

    • Spiros
    • Top 50 Contributor
      Male
    • Joined on 09-03-2007
    • Thessaloniki GREECE
    • Posts 1,088
    • Gold Member

    Re: Parts for update - MPAV

    Why then don't you buy a BC2300?!? I think it can be combined with the AV9000 over a 1611 or 1614 converter!

    As for the large clamp you can always find it over eBay.

    BTW I do have one if you are looking for this. Brand new

    Best regards

    Spiros

  • 10-08-2011 4:23 PM In reply to

    Re: Parts for update - MPAV

    Spiros:
    BTW I do have one if you are looking for this. Brand new

     

    Is it the shiny or the matt clamper Spiros? Looking for the shiny one. There must be something we could exchange, don't we?

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 10-08-2011 6:43 PM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Hi Spiros

     

    I have bought the MPAV 9000 so I can use it to control my AV 9000 - But yes, a BC2300 would have been a better choise if that wasn't the case.

     

    - Dennis

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 10-09-2011 12:51 AM In reply to

    • Spiros
    • Top 50 Contributor
      Male
    • Joined on 09-03-2007
    • Thessaloniki GREECE
    • Posts 1,088
    • Gold Member

    Re: Parts for update - MPAV

    Dennis (Loudspeaker):

    Hi Spiros

     

    I have bought the MPAV 9000 so I can use it to control my AV 9000 - But yes, a BC2300 would have been a better choise if that wasn't the case.

     

    - Dennis

    Totally agree with you. Having the complete setup for many years now, honestly I don't remember using the TV button on the MPAV9000 more than 2-3 times!! But of course it is a matter of taste. @ Leslie OOOUUUPPPSSS It's not the shiny one! Still of course it is brand new! I'd love a Beolink 7000 floor stand!!!!!!!!!!!!!

    Best regards

    Spiros

  • 10-09-2011 3:28 AM In reply to

    Re: Parts for update - MPAV

    Spiros:
    I'd love a Beolink 7000 floor stand!!!!!!!!!!!!!

    Yeah, right, exchanging with 6 clampers would be okayBig Smile Got two of these stands incl. the original power supply and btw, I've got the wall charger as wellWhistle

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 10-09-2011 3:33 AM In reply to

    Re: Parts for update - MPAV

    Dennis (Loudspeaker):

    I want to update my MPAV 9000 a little bit, so I’m looking for following parts:

    - Front piece (BC 2300)

    - Large Clamper, Polished (BS 3200)

    Dennis, I know a person in Germany who sells these 2 parts. Only thing I don't understand is the front piece of the BC2300. It's not the same as the MPAV900 since the last one has a cassette, is it?

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 10-09-2011 3:35 AM In reply to

    • Spiros
    • Top 50 Contributor
      Male
    • Joined on 09-03-2007
    • Thessaloniki GREECE
    • Posts 1,088
    • Gold Member

    Re: Parts for update - MPAV

    Yes I know the magic closet!!!!! And all of them (yours) are really as new!!!!!

    Best regards

    Spiros

  • 10-09-2011 7:55 AM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Spiros:
    Totally agree with you. Having the complete setup for many years now, honestly I don't remember using the TV button on the MPAV9000 more than 2-3 times!! But of course it is a matter of taste. @ Leslie OOOUUUPPPSSS It's not the shiny one! Still of course it is brand new! I'd love a Beolink 7000 floor stand!!!!!!!!!!!!!

    I'm am going to mount it on the wall next to my sittingspot on the sofa - I will post a picture of it when it's mounted, but I have to find a wall bracket first (I have updated the list).

    - Dennis

     

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 10-09-2011 8:09 AM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Leslie:

    Dennis, I know a person in Germany who sells these 2 parts. Only thing I don't understand is the front piece of the BC2300. It's not the same as the MPAV900 since the last one has a cassette, is it?

    Sounds good Leslie. Have you bought from this person before? Smile I'm looking for a BC2300 front piece as I want to get rid of the casette deck - To make it look newer, and because I never am going to use the casette deck. Smile I'm just unsure if it fits because of the different displaysize? Hmm

     

    - Dennis

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 10-09-2011 9:05 AM In reply to

    Re: Parts for update - MPAV

    Dennis (Loudspeaker):
    Have you bought from this person before? Smile 

    Yes I did, in fact Soren (Mexico) did to (alum. CD). Be sure you make the right choice regarding the 2300 face plate. I don't think this will fit the MPAV9000.

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 10-09-2011 9:33 AM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Can you put me in touch with him? Smile He may also knows if the BC2300 front will fit the MPAV9000?

    - Dennis

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 10-09-2011 9:45 AM In reply to

    Re: Parts for update - MPAV

    Dennis (Loudspeaker):

    Can you put me in touch with him? Smile He may also knows if the BC2300 front will fit the MPAV9000?

    - Dennis

    Sure, you have PM!

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 10-09-2011 11:29 AM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Hmmm.... Haven't recieved anything in my inbox... HmmConfused

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 10-09-2011 11:41 AM In reply to

    Re: Parts for update - MPAV

    Hmmm.... Maybe your private mail?HmmWink

    I have send you one....

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 10-09-2011 11:58 AM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Thought it was here on the site I would recieve it! Stick out tongue Anyway, I have recieved it on Beoworld now! Thank you very much Leslie! Smile

    - Dennis

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 11-04-2011 6:39 PM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    No one that has one or more of the following parts?:

    - RDS Module (BC 2300/2500, BS Ouverture, MPAV 9000)

    - SW 1.2 (Or higher?) (MPAV 9000)

    - Wall Bracket (BC 2300/2500, BS Ouverture, MPAV 9000 etc.)

    - Dennis

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 11-04-2011 6:44 PM In reply to

    Re: Parts for update - MPAV

    I've got several MPAV9000 with RDS and brackets!

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 11-04-2011 6:47 PM In reply to

    Re: Parts for update - MPAV

    And original MPAV9000 stands...

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 11-04-2011 6:54 PM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Sounds good Leslie! I don't need a MPAV 9000 stand right now, but I could be interested in a RDS module and a Wall Bracket. How much are the parts - If you want to sell of course - Make me an offer! Smile

    - Dennis

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 11-04-2011 7:00 PM In reply to

    Re: Parts for update - MPAV

    Actually I don't wanna take the RDS module apart from the AV9000 unless you give me a good price for it, then I'm willing to take it out.

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 11-04-2011 7:11 PM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    I fully understand - I don't need RDS that much that I want to pay more for the RDS Module, than I gave for the MPAV9000 Laughing - I'm also more looking for a RDS Module that is just lying around. Smile

    - Dennis

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


  • 11-04-2011 7:16 PM In reply to

    Re: Parts for update - MPAV

    I can understand that to. It has an xtra added value for my MPAV900 when I want to sell it so I'm happy with that. Good luck finding one. Will keep my eyes open for you whenever I see one!

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 11-04-2011 7:22 PM In reply to

    • Dennis
    • Top 500 Contributor
      Male
    • Joined on 02-01-2009
    • Denmark
    • Posts 172
    • Gold Member

    Re: Parts for update - MPAV

    Thank you very much, Leslie! Smile

    - Dennis

    I was borned with a Beolink 1000 in my hand!

    Ever seen a Beomaster 6001? I have one! Look here.

    Main system: Beovision AV9000, Beocenter 2300, Beosystem 3500, Beolab Penta MKIII, Beolab 3000, Beogram 6500, Beolink 1000, Beolink 5000, Beolink 7000

    Wish list: Beolab 2,


Page 1 of 2 (28 items) 1 2 Next >