in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012


Latest post 08-05-2011 1:33 PM by Vienna. 1 replies.
Page 1 of 1 (2 items)
Sort Posts: Previous Next
  • 08-05-2011 12:08 PM

    • Marcus
    • Not Ranked
    • Joined on 07-26-2011
    • Karlstad, Sweden
    • Posts 15
    • Bronze Member

    BeoLink Eye help needed quickly!



    I just bought a BeoVision 4-50 with BeoSystem 2. When I came home I noticed that the IR-receiver unit where missing. I will get it shipped to me in two weeks. So I thought that I could use my BeoLink Eye from my BeoLink Aktive during this time. But there is a different connector on the cable. So what I need to know is the pin configuration for the 8-pin mini din in my BeoSystem and what cables to connect in the other end (BeoLink Eye) There is 5 cables in there (yellow, grey, green, white and brown). I can not find what the do in any documentation. 


    So if anybody knows anything about the pin configuration of the 8-pin mini din and the BeoLink Eye I would really like to know :-)


    Thanks a lot!



    BeoSound 9000 MKII

    BeoSound 3200

    BeoVision 4-50 MKIII (BeoSystem 2 MKIII)

    BeoLab 3

    BeoLab 2

    BeoMedia 1


    BeoCom 2

    Beo4 MKI, MKIII



  • 08-05-2011 1:33 PM In reply to

    • Vienna
    • Top 100 Contributor
    • Joined on 08-15-2008
    • make an educated guess
    • Posts 712
    • Bronze Member

    Re: BeoLink Eye help needed quickly!


    If your BeoSystem 2 is a (HD-ready) MK3 version you'll need:

    8089000 IR-sensor with auto contrast
    6277910 Wire f/IR-sensor with auto contrast (9 pin mini DIN)

    MK1 and MK2 versions of the BSy 2 used:   

    8089110 IR-sensor without auto contrast
    6270758 Wire for IR-sensor (3,5 mm mini jack)

    Maybe a "BeoLink PC2 / BeoPort / Avant US" IR sensor will also work,
    if your BSy has an 3,5mm IR INPUT in addition to the STB-IR OUTPUT

Page 1 of 1 (2 items)