1. The default setting for the AV9000 is that V.Tape will work the
VCR. I use V.Aux for the Sky+ - I have a Set Top Box controller fitted
so that it all works together with the Beo4.
2. You need to reset
the options on the TV and audio systems. Both need to be option 1 -
your TV will at present be option 2 and the audio option 0 so it will
not respond to the remote. To change option, press list and stand by
together - use list to scroll to option? You will then get the choice
of v.opt and a. opt. Chosse one and the press 1 and then go. Repeat with
the other option and all should work again.
3 The stand simply needs to be reset - it is in the TV menu - press menu when the set is on TV and you will get the menu up including the stand menu - it is simply a case of choosing TV on or standby, moving the set to the desired place and pressing GO which will store the setting.
As far as the format is concerned, the set defaults to the signal sent - are you using a STB? If so, I would suggest that the STB settings are on 16:9 and you need to change this to 4:3.
Welcome to Beoworld