How to store change in screen format for Beovision 3 -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 01-10-2011 1:59 PM by 8chunk. 2 replies.

Page 1 of 1 (3 items)
	Sort Posts: Previous Next

01-10-2011 12:05 PM

8chunk
Joined on 01-10-2011
Posts 2

How to store change in screen format for Beovision 3

Reply Contact

I would like to be able to change the format of the picture on my recently acquired Beovision 3 TV.

I've read through the manual and have found out how to change it on a "one off basis"... by going to Menu... Setup.... Format...1..2..3

What I can't seem to do is get the TV to store the new setting for next time.

What am I doing wrong... or is it ony possible to alter the screen size each time I use the TV?

Any pointers are more than welcome.

Thnx in advance

Richard

01-10-2011 1:37 PM In reply to

Keith Saunders
Joined on 04-16-2007
Technical Advisor, Little Ann, Hampshire, UK
Posts 3,810

Re: How to store change in screen format for Beovision 3

Reply Contact

Richard,

A Very Warm Welcome to Beoworld..

Depending on the transmission the format will automatically set. If you change it using the FORMAT command, that setting is NOT stored for future use, only for the current viewing.

In other words, if you want to change it, you will have to change it each time you use the TV.

Regards Keith....

01-10-2011 1:59 PM In reply to

8chunk
Joined on 01-10-2011
Posts 2

Re: How to store change in screen format for Beovision 3

Reply Contact

Thnx for you welcome Keith and your advice

Page 1 of 1 (3 items)