Beolab Penta 2 Display failure on one speaker -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 06-17-2007 1:44 AM by ridax. 3 replies.

Page 1 of 1 (4 items)
	Sort Posts: Previous Next

06-16-2007 2:25 PM

zpalmc
Joined on 06-10-2007
Posts 2

Beolab Penta 2 Display failure on one speaker

Reply Contact

Hi,

Does anyone have any experience in repairing the Beolab Penta 2 display. One speaker is OK, the other is no display at all.

I have checked Audio and Video switches and switched round the powerlink cables. Still one speaker refuses to display.

Also does anyone know where replacement display perspex covers can be found as I have a big crack in one.

Cheers

Chris (ZPALMC)

06-16-2007 2:37 PM In reply to

Jandyt
Joined on 04-01-2007
Clitheroe, Lancashire, UK
Posts 13,004

Re: Beolab Penta 2 Display failure on one speaker

Reply Contact

Ridax is the man! Try searching for him then send him a PM
Good luck.

Andy T.

Poor me, never win owt!

06-16-2007 7:12 PM In reply to

zpalmc
Joined on 06-10-2007
Posts 2

Re: Beolab Penta 2 Display failure on one speaker

Reply Contact

Thanks Andy, I will give it a try.

Cheers

06-17-2007 1:44 AM In reply to

ridax
Joined on 04-16-2007
Posts 44

Re: Beolab Penta 2 Display failure on one speaker

Reply Contact

Did you try to switch the display modules between the speakers and see if the fault transfers to the other speaker? If you by this can make sure that it is the display modue that is faulty and not something in the amplifier section, then try to switch the different boards in the display module to see which board in the display module is faulty.

Page 1 of 1 (4 items)