Avant Picture Settings -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 01-26-2009 1:08 PM by Craig. 2 replies.

Page 1 of 1 (3 items)
	Sort Posts: Previous Next

01-26-2009 7:37 AM

k984942
Joined on 11-10-2008
London, UK
Posts 194

Avant Picture Settings

Reply Contact

Hi All

From what I understand, B&O calibrate all their TV's prior to leaving the factory.

As a second hand owner, I'm not sure if these settings have been altered by the previous owner or not.

Does anyone know what they should be so I can check them adjust accordingly?

Thanks

32" RF VCR Avant, 2 x 28" VCR Avant, DVD1, Beocom 6000, Beo5, A9 Keyring!

01-26-2009 9:57 AM In reply to

Dave
Joined on 04-17-2007
Brisbane, Australia
Posts 2,328

Re: Avant Picture Settings

Reply Contact

To my knowledge those settings are calibrated to a standard and compenate for any differences / innaccuracies that the parts and hardware of the television may cause (most have unique values)... i know this is the case with the speaker calibration in the beolabs...

“Quality is never an accident; it is always the result of intelligent effort.”

Your health and well-being comes first and fore-most.

01-26-2009 1:08 PM In reply to

Craig
Joined on 03-29-2007
Costa Del St Evenage
Posts 4,855

Re: Avant Picture Settings

Reply Contact

Dave:

To my knowledge those settings are calibrated to a standard and compenate for any differences / innaccuracies that the parts and hardware of the television may cause (most have unique values)... i know this is the case with the speaker calibration in the beolabs...

Agree with Dave, I believe they are different from one set to another.

Craig Smile

For millions of years, mankind lived just like the animals. Then something happened which unleashed the power of our imagination. We learned to talk and we learned to listen..

Page 1 of 1 (3 items)