in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 08-05-2008 1:49 AM by joeyboygolf. 7 replies.
Page 1 of 1 (8 items)
Sort Posts: Previous Next
  • 07-06-2008 4:24 AM

    • stotty1111
    • Top 75 Contributor
      Male
    • Joined on 12-16-2007
    • UK / France - Nth Worcestershire/Finistere
    • Posts 924
    • Gold Member

    Centre panel for a bc 8500

    hi all

    anyone out there got or can point me at a centre panel for a bc 8500 - mine got damaged last week by a halogen lamp being upended by a curtain movement caused by high winds thro' the patio door! - it chipped the dark grey paintwork - about a 10mm chip - really fortunate not to have crashed onto the glass panel!

    salut

    tony s

    I always try to operate using/following the KISS principle --  Keep it simple stupid!

  • 07-06-2008 4:55 AM In reply to

    • Craig
    • Top 10 Contributor
      Male
    • Joined on 03-29-2007
    • Costa Del St Evenage
    • Posts 4,855
    • Founder

    Re: Centre panel for a bc 8500

    As fas as I know only the panels for the Beocenter 9300 are still available from B&O.

     

    CraigSmile

    For millions of years, mankind lived just like the animals. Then something happened which unleashed the power of our imagination. We learned to talk and we learned to listen..

  • 07-06-2008 5:50 AM In reply to

    • stotty1111
    • Top 75 Contributor
      Male
    • Joined on 12-16-2007
    • UK / France - Nth Worcestershire/Finistere
    • Posts 924
    • Gold Member

    Re: Centre panel for a bc 8500

    ta for that but are they in shiny/brushed ali/steel or can i get one in matt grey?

    t

    I always try to operate using/following the KISS principle --  Keep it simple stupid!

  • 07-06-2008 6:47 AM In reply to

    • Craig
    • Top 10 Contributor
      Male
    • Joined on 03-29-2007
    • Costa Del St Evenage
    • Posts 4,855
    • Founder

    Re: Centre panel for a bc 8500

    They are as you say the Brushed Alluminium ones. not sure how you can get hold of the painted ones for the Beocenter 8500.

     

    CraigSmile

    For millions of years, mankind lived just like the animals. Then something happened which unleashed the power of our imagination. We learned to talk and we learned to listen..

  • 07-06-2008 6:47 AM In reply to

    • Craig
    • Top 10 Contributor
      Male
    • Joined on 03-29-2007
    • Costa Del St Evenage
    • Posts 4,855
    • Founder

    Re: Centre panel for a bc 8500

    They are as you say the Brushed Alluminium ones. not sure how you can get hold of the painted ones for the Beocenter 8500.

     

    CraigSmile

     

    For millions of years, mankind lived just like the animals. Then something happened which unleashed the power of our imagination. We learned to talk and we learned to listen..

  • 07-06-2008 9:22 AM In reply to

    Re: Centre panel for a bc 8500

    Only 9300 shiney panels available new.

    You are probably best off buying a set of 3 grey panels if you can find them, as panels all fade based on the light in the room they have been stored. So a centre panel from somebody else is unlikely to match your cd and tape panels.

    Regards Brett
  • 08-04-2008 4:42 PM In reply to

    Re: Centre panel for a bc 8500

    Does anyone know how much these new shiny panels would cost and how can you order them from b&o? I dont have a b&o dealer in the near region. Just asking if worst comes to worst
  • 08-05-2008 1:49 AM In reply to

    Re: Centre panel for a bc 8500

    The set of polished panels costs around £100 and is available from B&O.

    Regards Graham

Page 1 of 1 (8 items)