in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 11-27-2007 9:21 AM by Medogsfat. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next
  • 11-27-2007 7:02 AM

    • Graeme
    • Top 500 Contributor
    • Joined on 04-16-2007
    • Aberdeenshire Scotland
    • Posts 194
    • Bronze Member

    Is this right?

    Saw these on ebay, the drivers seem to be glued in, there doesnt even look like there are screws in the drivers

    http://cgi.ebay.co.uk/bang-and-olufsen-b-o-cx100-speakers-BANG-OLUFSEN_W0QQitemZ110199039968QQihZ001QQcategoryZ14991QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

    Cheers Graeme
  • 11-27-2007 7:15 AM In reply to

    • Christian
    • Top 100 Contributor
      Male
    • Joined on 04-16-2007
    • Copenhagen, Denmark
    • Posts 626
    • Bronze Member

    Re: Is this right?

    Graeme:

    Saw these on ebay, the drivers seem to be glued in, there doesnt even look like there are screws in the drivers

    http://cgi.ebay.co.uk/bang-and-olufsen-b-o-cx100-speakers-BANG-OLUFSEN_W0QQitemZ110199039968QQihZ001QQcategoryZ14991QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

    This is how they look! Smile

    Living room: BV7-40 mkIV + V8000, BL5, BL3, BM1 and BS9000. Bedroom: MX3000 and BL4500 on MCL2-AV. Around: PentaIII, CX100 and MCX35 on ML/MCL + MCL2-A, BeoPort and BL4 on ML, BS3300 + M75 as stand alone, BC6000 + BC600 and BT1100, LC1, LC2, Beo4, Beo5 and BL1000, BS2 and A8, EarSet2, Apron, Coffee mugs, Enamel Bagdes, Bath towel, Keyring, Books, Lots of miniature and the Bottle opener. Office: BC2300 + BL2500 and BS3. Summer house: BS Century.

    Addicted? Oh no.... ;)

  • 11-27-2007 7:29 AM In reply to

    • Graeme
    • Top 500 Contributor
    • Joined on 04-16-2007
    • Aberdeenshire Scotland
    • Posts 194
    • Bronze Member

    Re: Is this right?

    Really?.................

    I have an old pair of C75's and they look very different from this, I have seen some pics of Cx100's before and don't recall them looking like this.

    So am I right in thinking the drivers are held in only by the resin/glue?

    Cheers Graeme
  • 11-27-2007 9:21 AM In reply to

    • Medogsfat
    • Top 10 Contributor
      Male
    • Joined on 02-21-2007
    • *Moderator* Leeds, Yorkshire
    • Posts 4,045
    • Founder

    Re: Is this right?

    Yes Graeme the tweeters are just glued in, the bass & midrange have screw fixings into a plate that is also glued in. Resin & other palstics are very useful in speaker design due to the inherent sound absorbing properties so don't be at all alarmed by this. There is no possibilty of them falling out though - very well stuckSmile

     

    Chris.

    The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.

Page 1 of 1 (4 items)