in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 05-06-2009 9:28 PM by Andrew. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next
  • 10-29-2007 9:44 PM

    • B Price
    • Not Ranked
      Male
    • Joined on 07-11-2007
    • Virginia, USA
    • Posts 13
    • Bronze Member

    Beogram RX

    Another question on my RX. As stated in previous posting question, am totally unfamiliar with B&O products, but they are lovely. Just acquired this table, untested. Have been playing it today and am certain it is 1-3 rpm's to slow, being familiar w/the Carly Simon lp played. Is there anything I can do? No B&O techs around here! thanks............what a great site.
  • 10-30-2007 8:42 AM In reply to

    • Dillen
    • Top 10 Contributor
    • Joined on 02-14-2007
    • Copenhagen / Denmark
    • Posts 5,008
    • Founder

    Re: Beogram RX

     There's a couple of adjustments from below but why not get the service manual from the download section. It will describe the correct procedure for adjustment of speeds etc. I'm not sure we have the RX manual but the Beogram 2000 manual will fit nicely since it's pretty much the same internals.

    Martin

  • 10-30-2007 3:04 PM In reply to

    • B Price
    • Not Ranked
      Male
    • Joined on 07-11-2007
    • Virginia, USA
    • Posts 13
    • Bronze Member

    Re: Beogram RX

    Martin, really appreciate the info. Will try this later & post results. thanks so much...........p.s., checked a known  song on 45 rpm and it seemed out of pitch also.

  • 10-30-2007 5:02 PM In reply to

    • Dillen
    • Top 10 Contributor
    • Joined on 02-14-2007
    • Copenhagen / Denmark
    • Posts 5,008
    • Founder

    Re: Beogram RX

    Yes, the 33 and 45 speeds are slightly dependent. There's a specific procedure and order of adjusting.

    Martin

  • 05-06-2009 8:21 PM In reply to

    • B Price
    • Not Ranked
      Male
    • Joined on 07-11-2007
    • Virginia, USA
    • Posts 13
    • Bronze Member

    Re: Beogram RX

    Martin, been a year. Have had serious accident since then and no time to check 0ut table. Have not found a way to adjust the pitch on the turntable. Any help appreciated

  • 05-06-2009 9:28 PM In reply to

    • Andrew
    • Not Ranked
      Male
    • Joined on 03-16-2009
    • Melbourne, Australia
    • Posts 49
    • Bronze Member

    Re: Beogram RX

    hey bprice

    you will need to pay the membership fee to join the site and you will be able to download the service manual which should have the procedure to adjust the pitch of each speed.

    Andrew

Page 1 of 1 (6 items)