in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 09-06-2007 3:43 PM by Jandyt. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next
  • 09-06-2007 4:01 AM

    • Kokomo
    • Top 100 Contributor
      Male
    • Joined on 08-21-2007
    • Spain
    • Posts 618
    • Bronze Member

    Uaing Lc1/L2 as power switch

    Would it be possible, or more importantly would it be safe, to use an LC1 or LC2 to switch an amplifier on/off via its mains power lead?

    Any advice appreciated. 

  • 09-06-2007 4:03 AM In reply to

    • Kokomo
    • Top 100 Contributor
      Male
    • Joined on 08-21-2007
    • Spain
    • Posts 618
    • Bronze Member

    Re: Uaing Lc1/L2 as power switch

    Sorry about the spelling in the subject title. The word should be Using!
  • 09-06-2007 4:42 AM In reply to

    • stefan
    • Top 50 Contributor
      Male
    • Joined on 04-16-2007
    • 200 miles from Struer
    • Posts 1,733
    • Founder

    Re: Uaing Lc1/L2 as power switch

    Yes it will work with LC 2. Touch the sensor of the LC 2 and press BEO 4 - LIGHT-SETUP-0-STORE-GO-3 (or 4). Your LC 2 is now a mains switch (max. 300 W if I remember correctly) controlable by BEO 4 or by touching the sensor area (correct word ???). No dimming function anymore. Back to dimming is LIGHT-SETUP-0-STORE-GO-1 (or 2).
    I´m not sure with LC 1.
    Good Luck Stefan
     
  • 09-06-2007 6:30 AM In reply to

    • ChrDH
    • Top 150 Contributor
    • Joined on 04-16-2007
    • Denmark
    • Posts 493
    • Founder

    Re: Uaing Lc1/L2 as power switch

    It will not work with the LC1, it can only dim.

    br

    Chr.

    Beosound Ouverture, Beocenter 9000, Beovision MX6000, Beocord VX7000
  • 09-06-2007 8:03 AM In reply to

    • Kokomo
    • Top 100 Contributor
      Male
    • Joined on 08-21-2007
    • Spain
    • Posts 618
    • Bronze Member

    Re: Using Lc1/L2 as power switch

    Thanks Stefan & Chr for your helpful & prompt responses.

    Much appreciated

  • 09-06-2007 3:43 PM In reply to

    • Jandyt
    • Top 10 Contributor
      Male
    • Joined on 04-01-2007
    • Clitheroe, Lancashire, UK
    • Posts 13,004
    • Founder

    Re: Using Lc1/L2 as power switch

    Kokomo, I am just curious as to why you would want to do this. Is it a B&O Amplifier?

    Andy T.

    Poor me, never win owt!

Page 1 of 1 (6 items)