in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 08-21-2007 2:19 PM by Jandyt. 4 replies.
Page 1 of 1 (5 items)
Sort Posts: Previous Next
  • 08-21-2007 10:19 AM

    • Kokomo
    • Top 100 Contributor
      Male
    • Joined on 08-21-2007
    • Spain
    • Posts 618
    • Bronze Member

    LC 2 on/off function

    Please help!

    I have 4 LC2s and cannot disable the on/off function on any of them. I must be doing something wrong but I can't understand what.

    I follow the following procedure as stated in the instruction booklet via my Beo4:-

    Press LIGHT then LIST to display SETUP. Press 0, the LIST to display STORE. Press GO, Then 1.

    But it doesn't work!

    I've tried the above procedure with the lights on and off, but it makes no difference.

    As I live in Spain and powercuts are not uncommon, it means that if one has occured whilst I am out, when I return all the lights are on.

    Any advice much appreciated. 

     

     

     

     

  • 08-21-2007 10:33 AM In reply to

    • maclife
    • Not Ranked
    • Joined on 05-16-2007
    • Brussels, Belgium
    • Posts 26
    • Bronze Member

    Re: LC 2 on/off function

    kokomo:

    Please help!

    I have 4 LC2s and cannot disable the on/off function on any of them. I must be doing something wrong but I can't understand what.

    I follow the following procedure as stated in the instruction booklet via my Beo4:-

    Press LIGHT then LIST to display SETUP. Press 0, the LIST to display STORE. Press GO, Then 1.

    But it doesn't work!

    I've tried the above procedure with the lights on and off, but it makes no difference.

    As I live in Spain and powercuts are not uncommon, it means that if one has occured whilst I am out, when I return all the lights are on.

    Any advice much appreciated.

    You have to continuously touch the half-dome (the sensi-touch field) of the LC2 during that process, otherwise your commands will be ignored. HTH
  • 08-21-2007 11:16 AM In reply to

    • Kokomo
    • Top 100 Contributor
      Male
    • Joined on 08-21-2007
    • Spain
    • Posts 618
    • Bronze Member

    Re: LC 2 on/off function

    Thanks a lot, just tried it and it works!

    Why don't the instructions mention that small point?

    Thanks again - much appreciated.  

  • 08-21-2007 11:48 AM In reply to

    • maclife
    • Not Ranked
    • Joined on 05-16-2007
    • Brussels, Belgium
    • Posts 26
    • Bronze Member

    Re: LC 2 on/off function

    kokomo:

    Thanks a lot, just tried it and it works!

    Why don't the instructions mention that small point?

    Thanks again - much appreciated.

    Well, it’s mentioned on page 20 in the english version of the manual ("The three types of reprogramming are all carried out by holding the dark front half-dome (the sensi-touch field) and simulateously pressing the sequences of keys on your Beolink Terminal") but hidden so efficient that many people (including me) just didn’t find it when first trying ...
  • 08-21-2007 2:19 PM In reply to

    • Jandyt
    • Top 10 Contributor
      Male
    • Joined on 04-01-2007
    • Clitheroe, Lancashire, UK
    • Posts 13,004
    • Founder

    Re: LC 2 on/off function

    Party!!!Big SmileParty!!!

    Just 14 minutes from question asked to problem solved!!
    That's what we like to see.Yes -  thumbs up
    Wonder how long it would have taken on the official site?Erm

    Andy T.

    Poor me, never win owt!

Page 1 of 1 (5 items)