I have an elder beosystem 2 with a beovision 4 display.

During a repair I lost all the setup values in the system (service menu).

I know that some of the values a component specific, but if anybody can provide the values from their system, then these could serve as a starting point for a new calibration. In the service menu -> picture adjustments i am looking for following values:

Rdr

Gdr

Bdr

Bri

Con

Wpr

Wpb

Rct

Bct

Briof

Conof

Colof

Color temp

Comb filter

Movie mode

Gain adjust

7115

7118

R

G

B

Limit

Color adjust

RGB

Cvbs

Many thanks in advance

Is there really no one in here which can assist me with these values.

Maybe i am the last one on th planet with this old system?

Hello Erik-NL

Today evening I can check my values and respond them to you

hfat

If you have an official BV4, which I assume. Then some of the values are noted on the back of the BV4.

These (calibrated) values have to be set in this BS2 menu.

Oh, I remember things again.

Inside the BS2 there is an aluminium labelled box. (tuner).

On that label, some info has been written.

Look:

 

in case it helps, my values:

rdr 36

gdr 35

bdr 37

bri 36

con 25

wpr 19

wpb 20

rct 29

bct 46

briof 16

conof 39

colof 16

color temp norm

comb filter on

movie mode on

gain adjust 120 124 +23 +9 -13 on

 

Beoboddy & hfat - many thanks