I need some direction on adding or should I state getting my Beolab 4000's to work with the 7-55. I have them hooked and set up and ran the set mode.  However, they don't turn on when the TV is turned on. If I go into Options and select Adjustment and highlight video speakers 2 or 3 the speakers turn on and sound great. When I select store the speakers go into standby. How can I get these things to turn on when I turn the TV on?

Any help is appreciated.

You use the BL4000 as rear speakers I assume.

1, select left/right speaker on rear side of your BL4000 (not line!)

2, you have used the rear speaker output sockets of BeoSystem 3 of your BV7-55

3, you select BL4000 in the DSS setup of your BV7-55

select speaker modes 1-5:
Mode 1: Stereo centre speakers (subwoofer muted) 
Mode 2: Stereo in L/R speakers (subwoofer is active)
Mode 3: Dolby 3 stereo 
Mode 4: Dual stereo, stereo in L/R front and rear speakers (subwoofer is active) 
Mode 5: Dolby digital, Dolby Pro-logic, DTS, Dolby 7.1

That`s it!

Thank you very much for your help.

I have the 4000 as rear in my 7-55 setup with BL9 as front.

I think that the 4000 are brilliant speakers.