in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 10-07-2011 3:44 AM by tournedos. 1 replies.
Page 1 of 1 (2 items)
Sort Posts: Previous Next
  • 10-06-2011 6:37 PM

    • kai
    • Top 500 Contributor
    • Joined on 11-16-2008
    • Posts 81
    • Bronze Member

    5500 system and lab8000

    Hi

    I was wanting to connect the above speakers (lab8000) to the beosystem 5500, however It does not seem to have power link, will I have to use the special cables that plug into speaker din sockets, or would you take the opportunity to upgrade the audio system

  • 10-07-2011 3:44 AM In reply to

    Re: 5500 system and lab8000

    It's easiest by far to switch the Lab8000 to LINE mode and connect with RCA cables to the preamp outputs of the Beomaster 5500, nothing extra needed.

    The preamp outputs on 5500 are attenuated speaker outputs from the power amp, not a real preamp signal. So this isn't the most sensible combination, but it will work.

    -mika

Page 1 of 1 (2 items)