in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » BeoWorld around the world! » BeoWorld North America » Beolink 7000 Board schematic diagrams?
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 09-14-2011 1:08 PM by Ulf. 2 replies.
Page 1 of 1 (3 items)
Sort Posts: Previous Next

  • 09-10-2011 10:00 PM

    Beolink 7000 Board schematic diagrams?

    Reply Contact

    Howdy,

      My Beolink 7000 remote is giving "no contact", but controls the stereo and light just fine.  It is not receiving.   My Beolink 5000 is receiving just fine from the same stereo.

      I have already replaced the 5 capacitors per other posts.  Any other ideas?

      Does anyone have the detailed schematics of the Beolink 7000 remote?  I need the schematic for the boards, which are NOT in the service manual on this site.  I have already downloaded that manual.

      Any ideas folks?

    Thanks,
    Seahawk

  • 09-11-2011 12:48 AM In reply to

    Re: Beolink 7000 Board schematic diagrams?

    Reply Contact

    Can you post a picture of your modification on the board. Pure interest. Had the same issue before using smd components (2 caps under the tin can) with still "no contact" messages. Have been using tantalium after and then it worked!

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 09-14-2011 1:08 PM In reply to

    • Ulf
    • Top 100 Contributor
      Male
    • Joined on 04-17-2007
    • Germany
    • Posts 665
    • Bronze Member

    Re: Beolink 7000 Board schematic diagrams?

    Reply Contact

    Use 2,2 uF 6,3 V.

    Good cleaning under the old caps

     

    Ulf
Page 1 of 1 (3 items)