In search of a SINGLE BL4K wall mount plate (not complete bracket)... exactly what would have been left behind during a careless uninstall!

Anyone have a spare sitting on a shelf?

Not being picky, I would consider a matched set of plate and bracket, perhaps even a pair if need be -though all I really need is the one plate.

I have a pair of BL4K table stands that I could offer (if I can find them) or, of course, PayPal.

Thanks!

Jeff I have a complete set not in use, but post a pic of your stands, I dont remember what they look like, and then we can maybe come to a deal.

Thank you for the reply!

I certainly would be interested.

I am just getting back into the Beo swing after a long, hot summer and some noted absence here. Let me go and try to dig up my stands. I have some searching to do as I still owe Rich a package with something else I need to find!

I will try to get some pics loaded, but don't get too excited as I seem to recall that they are not much more than a bent up piece of rod stock, though original.

Regards,

No hurry Jeff, but I'm maybe in McAllen TX end of next week, and it would be easier to ship and recieve from there.

Understood. I will make an effort this afternoon!

burantek:

In search of a SINGLE BL4K wall mount plate (not complete bracket).

If you mean the part of the bracket that you fix to the wall.... There is a 60% chance I have just that part in France. I will be driving down in early september. If I can find it, its yours. Will let you know either way.

valve1:

If you mean the part of the bracket that you fix to the wall....

That is EXACTLY what I am looking for.

The small, rectangular plate w/ the (4) four "hooks" and small post that screws to the wall. The bracket (attached) to the BL slides on to this missing piece.

Thanks!

burantek:

That is EXACTLY what I am looking for.

Let you know early September.

Jeff did you find the stands, btw I'm not going to TX, but can ship to you from here, but I would like to see a pic of the stands, to see if I want them, if I like them we change, if not I ship the complete set for BL 4000 to you, free of charge I wont use them anymore.

Sorry for my absynthe...

@ Søren, I will send you an eMail/PM when I get a chance as I think I would be interested in a full set as well as the single missing plate... that gives me some freedom for more BL4K's and I would not have to worry about the mounts!

@ valve1... thanks again and I look forward to the hope that you may have the plate.

 

Talk to you soon,

burantek:

@ valve1... thanks again and I look forward to the hope that you may have the plate.

Have not forgotten, leaving here on Sat, expect to arrive there Monday! Have a look tuesday.

 

Posted a rushed reply to this from a neighbours house while waiting for my dsl connection but it has not made it to the site! 

I searched all over for this bracket and now I  think its back in Dublin. I would not have thrown it out. Back there in two weeks and let you know then.  

valve1:

Back there in two weeks and let you know then.

Serched high and low in Dublin and I still can not find it. !!

I still got the set here , are you still interested, if you have the table stand post a pick (I dont know what it look like) and we can make a change, if not I will ship it to you for free, only pay shipping.

@valve1: Thank you so much for your efforts! Very kind!

@Søren: Thank you! I do have a problem though -I can't find the stands either! I DO have them -the question is finding them! I will happily work out a deal with you in the meantime and should I find them, I simply drop them into the post for you.

burantek:

@valve1: Thank you so much for your efforts! Very kind!

@Søren: Thank you! I do have a problem though -I can't find the stands either! I DO have them -the question is finding them! I will happily work out a deal with you in the meantime and should I find them, I simply drop them into the post for you.

PM me with where to ship, will go out this week

 

burantek:

I DO have them -the question is finding them! I

..... sounds like i am not the only one :-)

valve1:

burantek:

I DO have them -the question is finding them! I

..... sounds like i am not the only one :-)

Indeed! What can I say?!?!?

 

P.S. PM on the way, Søren.

burantek:

valve1:

burantek:

I DO have them -the question is finding them! I

..... sounds like i am not the only one :-)

Indeed! What can I say?!?!?

 

P.S. PM on the way, Søren.

I've seen much of it.  It's believable.

Did you ever start the addition, or did you decide to move?

burantek:

valve1:

burantek:

I DO have them -the question is finding them! I

..... sounds like i am not the only one :-)

Indeed! What can I say?!?!?

 

P.S. PM on the way, Søren.

 

Søren Mexico:

Jeff

Run in some problems here, the local post office told me, they are not allowed to send Steel or iron items to the US, With UPS I will have to pay MXP 750.00 (USD 60-65.00), with Mexpost i paid to DK some MXP 150.00 for the same, Thanksgiving I or someone else will go to TX, and can ship from there, so tell me 65.00 USD or wait for Thanksgiving.

First they sell all their arms to Mexico drug dealers, then get afraid thet we ship them back, paranoid ??

 

Aren't there tunnels, catapults or some such that you could use to transport this weapon of mass destruction cross the border?

Søren Mexico:

they are not allowed to send Steel or iron items to the US

So much for NAFTA!

 

tournedos:

Aren't there tunnels, catapults or some such that you could use to transport this

They have mile long lines of drug-laden illegals awaiting their turn.

 

OT: Per Rich's comment, I am in home limbo at this time -so there is no rush. Turkeyday will be fine! Thanks!

All,

 

Thanks for everyone's help/interest.

A set of brackets have arrived from Mexico! Thanks Søren! (PM sent)

Should anyone stumble across the original missing wall plate -I am still interested in "completing the set."