in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 06-23-2011 4:14 PM by w5bno123. 7 replies.
Page 1 of 1 (8 items)
Sort Posts: Previous Next
  • 06-09-2011 6:49 PM

    • mpijl
    • Not Ranked
    • Joined on 11-19-2008
    • Posts 15
    • Gold Member

    Beo4 (type 1710)

    Hi

    I've a new Beo4. For an older BV I need the V.SETUP button, but can't find it.

    Please help. Tx.
  • 06-10-2011 4:16 AM In reply to

    Re: Beo4 (type 1710)

    Hi there

    The features are listed in different sub sections on the remote once you have pressed; Standby and LIST together, ADD? appears, press GO then you can cycle through AV, CNTL etc by pressing list or up/down with the new cursor. It should be listed under AV.

    W5BNO
  • 06-11-2011 3:59 AM In reply to

    • mpijl
    • Not Ranked
    • Joined on 11-19-2008
    • Posts 15
    • Gold Member

    Re: Beo4 (type 1710)

    I tried ADD? and AV? but V.SETUP doesn't seem to be there. Running Beo4 in Mode2.

    Thanks for the advice, but any other suggestions.
  • 06-11-2011 4:07 AM In reply to

    Re: Beo4 (type 1710)

    I tried mine too and it's not in the list! Why do you need it for your bv1?
  • 06-11-2011 8:28 AM In reply to

    Re: Beo4 (type 1710)

    I tried mine. V. SETUP is present under AV. New Beo 4.

     

    Beovision 7-55 with Beolab 7-4, 9s and 4000s

    Beovision 10-40 with Beolab 1s and 6000s

    Beosound 1, 5, 2000, and 3000

    Beotime, Beotalk, Beocoms

  • 06-11-2011 9:53 AM In reply to

    Re: Beo4 (type 1710)

    Hi I have sussed it! When you go into Menu via Standby and LIST scroll through to CONFIG and VIDEO? appears press GO and then change to 6. Press BACK to come out of menu to ADD? again and it will appear in the list.

    Regards

    w5bno123

  • 06-22-2011 4:25 PM In reply to

    • mpijl
    • Not Ranked
    • Joined on 11-19-2008
    • Posts 15
    • Gold Member

    Re: Beo4 (type 1710)

    Hi w5bno123

     

    Thx. This works, indeed!

     

     

  • 06-23-2011 4:14 PM In reply to

    Re: Beo4 (type 1710)

    Your welcome! Don't get asked for that feature much these days!!!
Page 1 of 1 (8 items)