in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 04-30-2011 2:48 PM by ttshinykit. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next
  • 04-27-2011 5:01 PM

    BS3000 problem

    Not sure what's happened but I have a bit of a problem. I have a red standby light on the BS3000 and doors open but no buttons are working apart from the load cd button. Beo4 has no effect on the system at all. When I check the option and press red button/list scroll to option/go scroll to A.OPT & press 1, I get a blink on the BS3000 but still nothing, speakers not powering up or anything.

    If I go in the other room and turn on the masterlinked Beolab2000, I can play a cd from the BS3000 but only through the BL2000 and it turns itself off afte a few minutes.

    I bought a gear 4 Unity I/R remote to use with my iphone and had it configured to the BS3000 last week but it's been playing up and i wonder if it's totally thrown the BS3000 I/R logic out. HELP!

  • 04-27-2011 5:31 PM In reply to

    • Seanie_230
    • Top 75 Contributor
      Male
    • Joined on 04-20-2007
    • Milton Keynes, England
    • Posts 962
    • Gold Member

    Re: BS3000 problem

    Sounds like it needs the pin number anything on the display when you press cd? Sounds like what used to happen to me when it needed the pin to be input

    Beovision 7 MKIV (Blu Ray)
    Beolab 9

    Beolab 6000
    Beo 4
    Beocenter 9300
    Apple TV
    SKY HD
    Optoma HD65 Projector
    Lintronic TT455-RT-238
    Beovision 3 MKII

  • 04-28-2011 2:20 PM In reply to

    Re: BS3000 problem

    Nothing happens at all when I press cd. Does the BS3000 have a pin then? 

  • 04-30-2011 9:29 AM In reply to

    Re: BS3000 problem

    Reading the service manual, if it was the pin that was required it would ask for it? I have never set a pin but it could be that trying to congigure it to the iphone i/r codes the gear4 unity remote has accidentally locked it up. I'll try the 5 digit service code when i get home and if that works i'll apply to B&O for a mastercode to unlock it which they apparently keep on their system in Denmark. Can anyone that uses a pin tell me if it does actually prompt you for the pin?

    Seems strange that it powers up from the link room and then shuts down after a couple of minutes. Nothing works on the keypad apart from the load cd button. I really don't think it's a pin issue, any other ideas guys?

  • 04-30-2011 9:55 AM In reply to

    • Opman
    • Top 200 Contributor
    • Joined on 12-31-2007
    • Cheshire, UK
    • Posts 323
    • Bronze Member

    Re: BS3000 problem

    Have a look to see if any of the rubber keys have been jammed under the edge of the panel. Maybe a corner or one edge is stuck.

    Opman

  • 04-30-2011 2:48 PM In reply to

    Re: BS3000 problem

    Thanks Opman, I'd checked that and just double checked and all buttons are fine.

    Following the service manual, by pressing "sound 0258" I've gone into testmode and that booted up fine and I could read through all the TM codes but it goes into standby after 3 minutes. You're supposed to be able to key in <<11111 when prompted for  pin and this should overide & give you 12 hours use for servicing before shutting down. It doesn't prompt for a pin number and this doesn't work by just keying it in. Arghhhhhh! :(

Page 1 of 1 (6 items)