in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 04-26-2011 7:04 AM by Silou. 4 replies.
Page 1 of 1 (5 items)
Sort Posts: Previous Next
  • 04-18-2011 5:44 PM

    • kai
    • Top 500 Contributor
    • Joined on 11-16-2008
    • Posts 81
    • Bronze Member

    Lab 3500

    Hi

    Beolab 3500 used via the 8 pin mcl now changed to a beosound 3000, how do I activate the masterlink socket, i presume I must go into a service menu

    Kai
  • 04-19-2011 3:17 AM In reply to

    • petermc
    • Top 500 Contributor
    • Joined on 04-16-2007
    • Shepparton, Australia
    • Posts 87
    • Founder

    Re: Lab 3500

    Just had a look at the instructions for my BL3500.

    It doesn't mention any procedure for swapping between MCL & Beolink.

    My guess is to power down your BS3000 & BL3500, connect the masterlink cable to both products and switch the power back on. Switch the BS3000 on first and then the BL3500. I think the 3500 will recognise that it is now on Masterlink automatically.

    From memory the clock can take a little time before it displays.

    Hope this helps

     

    Peter

     

     

    Filed under:
  • 04-19-2011 4:57 AM In reply to

    • AdiS
    • Top 500 Contributor
    • Joined on 07-24-2007
    • Posts 196
    • Bronze Member

    Re: Lab 3500

     

     

    You have to change the setting in the service-menue. To get into the service 

    menu to switch between ML & MCL press MENU then  MENU then 0 then 2 

    then PLAY, then use the up arrow to switch, then store. It´s easy with BL 1000!

    http://www.beoworld.org/faq_view.asp?id=80

    regards, Adrian

     

  • 04-19-2011 6:24 PM In reply to

    • kai
    • Top 500 Contributor
    • Joined on 11-16-2008
    • Posts 81
    • Bronze Member

    Re: Lab 3500

    Adis

    Thanks for the reply will give that a go at the weekend

    Regards

    Kai
  • 04-26-2011 7:04 AM In reply to

    • Silou
    • Top 500 Contributor
      Male
    • Joined on 08-10-2007
    • Switzerland
    • Posts 241
    • Gold Member

    Re: Lab 3500

    and to go back to MCL ?

     

    Thank's

Page 1 of 1 (5 items)