Masterlink via RJ45 -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 02-14-2011 12:53 AM by Heribert. 2 replies.

Page 1 of 1 (3 items)
	Sort Posts: Previous Next

02-12-2011 4:51 AM

langleyav
Joined on 05-03-2007
London, UK
Posts 41

Masterlink via RJ45

Reply Contact

I want to rewire my Masterlink system with the newer RJ45 connectors. Does anyone have the approved connection pin details for distributing Masterlink via RJ45, as there seems to be a shortage of pins on the connector to supply all the required cable links.

Ron

Filed under: masterlink

02-12-2011 5:13 AM In reply to

YannChris
Joined on 04-16-2007
Larmor-Plage, France
Posts 276

Re: Masterlink via RJ45

Reply Contact

Hello Ron,

The New Installation Concept, using CAT7 wires and RJ45 connectors is out of the tube. It is compatible with ML products.

Your dealer has been provided with a leaflet (available on pdf) discribing the concept, the requirements and the connectors/junction boxes.

Ask him the file, there is an interresting FAQ section...

Kind regards,

Yann.

Ne pas s'en faire et boire frais!

Mon install en images: cliquez sur mon profil, au dessus de mon avatar - Puis "My files" tout en bas.

Pictures of my setup: click on my nickname, above my avatar. Then "my files" at the bottom of the page.

02-14-2011 12:53 AM In reply to

Heribert
Joined on 08-06-2009
Austria
Posts 592

Re: Masterlink via RJ45

Reply Contact

I am using RJ45 sockets already without any problems. my dealer made some cables from RJ45 (wall sockets) to ML.

BeoVision 8-40 / BeoVision 8-32 / Beovision 6-26 / BeoSound 3200 / BeoSound 1 / BeoLab 3 / Beolab 6000 / Beolab 2000 / Beoport / Beomedia 1 / 3* Beo4 /BeoCom 5 with VOIP

Page 1 of 1 (3 items)