in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 12-23-2010 2:21 AM by akoro. 1 replies.
Page 1 of 1 (2 items)
Sort Posts: Previous Next
  • 12-22-2010 5:27 PM

    Bv 7-32 (6-26) motor floor stand suitable for 10-40 810-46) series?

    The motor floor stand stand of Beovision 7-32 (6-26) is used for the BeoVision 10-40 (10-46) adding only the bracket adapter number 3130494?
    Hopefully you can just replace the aluminum pole with the parts for the series 10?
    Can you tell me if the two motor turntable unit are identical?
    Thank you.
    Andrea

     

  • 12-23-2010 2:21 AM In reply to

    • akoro
    • Top 500 Contributor
    • Joined on 08-07-2008
    • Espoo, Finland
    • Posts 88
    • Gold Member

    Re: Bv 7-32 (6-26) motor floor stand suitable for 10-40 810-46) series?

    Despite the resemblance you can't put BV10 into a BV6/7 motor stand:

    1. The cable has different connector.

    2. I tried putting BV10 with the bracket into BV7 stand and it will slant backwards. The tilt mechanism is different and BV10 will not stay in upright position - as the weight is somehow differently distributed.
Page 1 of 1 (2 items)