in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 12-27-2010 2:07 PM by Vienna. 4 replies.
Page 1 of 1 (5 items)
Sort Posts: Previous Next
  • 12-17-2010 6:59 AM

    • Solex
    • Not Ranked
    • Joined on 11-22-2010
    • Posts 26
    • Bronze Member

    beovision 10 problems with sound and picture (AV and SPDIF)

    I have a Logitech Duet audioplayer connected via SPDIF out  to SPDIF in from the Beovision 10 (via AV4).

    After about 10 minutes the tv switches to standby and so the audio stops.

    The Logitech Duet keeps playing, but no more sound from the speakers, because tv in standby.

    What can be the problem????

    I also connected the Logitech Duet via the aux from Beosound and masterlink to the beovision, then the tv stays on and the audio sound stays on.

    Also several times an hour sound and picture stops for about 3-10 seconds when watching DTV (via AV2).

    I coupled another (Samsung) tv on the same cable and ithe Samsung doesnot interrupt, so it has to be the Beovision 10.

    What could be the problem????

  • 12-19-2010 2:49 PM In reply to

    • Vienna
    • Top 100 Contributor
    • Joined on 08-15-2008
    • make an educated guess
    • Posts 712
    • Bronze Member

    Re: beovision 10 problems with sound and picture (AV and SPDIF)

    Smile It's not a bug, it's a feature ... very likely the energy saving option is "ON" 

    DO NOT CHANGE ANY OTHER VALUE IN THE CUSTOMER SERVICE MENUE EXEPT THE ONE DESCIBED!! 

    Press "TV", "MENU", select OPTIONS and press "RED" "GO" to get the customer service menu.

    Select 
    ADJUSTMENTS, navigate down to „Auto standby 15 min“ and change value to "OFF". (Default is "ON")
    Press "GO" to save and "EXIT" to leave the menu.
  • 12-20-2010 1:10 PM In reply to

    • Solex
    • Not Ranked
    • Joined on 11-22-2010
    • Posts 26
    • Bronze Member

    Re: beovision 10 problems with sound and picture (AV and SPDIF)

    The energy saving option is OFF.

    When I couple another digital tv on the same cable that tv is playing good and the Beovision interrupted.

  • 12-27-2010 7:47 AM In reply to

    • Solex
    • Not Ranked
    • Joined on 11-22-2010
    • Posts 26
    • Bronze Member

    Re: beovision 10 problems with sound and picture (AV and SPDIF)

    Yes problem is solved.

    In the service menu the energy saving option was ON (default). My dealer put it on OFF, and this problem was solved.

    The other problem, stopping sound/picture in DTV and on SPDIF for 2-3 seconds( and that several times an hour) is also solved. THe HDMI cable between Humax receiver and Beovision had bad contact.

    THNX for your support Vienna.

     

  • 12-27-2010 2:07 PM In reply to

    • Vienna
    • Top 100 Contributor
    • Joined on 08-15-2008
    • make an educated guess
    • Posts 712
    • Bronze Member

    Re: beovision 10 problems with sound and picture (AV and SPDIF)

    Solex:

    THNX for your support Vienna.

    My pleasure!

Page 1 of 1 (5 items)