in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 10-21-2010 10:30 AM by talisman. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next
  • 10-21-2010 9:03 AM

    • Christer
    • Not Ranked
      Male
    • Joined on 01-18-2010
    • Stockholm
    • Posts 13
    • Silver Member

    Controlling external devices via puc

    Hi!

    I have a BV7 MK4 connected direct via HDMI to a Humac HD 1000 and via a Gefen HDMI Splitter to a Tvix and a PS3.

    All these devices are set to go ON and OFF togheter with the TV. This works 7 of 10 times but sometimes

    the external devices dont start or won´t go to stby.

    This is very annoying sinve I have to go and push ON and OFF on the boxes manually and also that I can´t know if they are on or OFF if i don´t go and check.

    Does anyone know anyway to make this work?

     

    Brgs

    Christer

    BV7-40 MK IV, BS/BM5, BL9, BL3, BL2

    BV10-32 MKII, BL11

    MAC MINI, TVIX, GEFEN, HUMAX, PS3

  • 10-21-2010 9:38 AM In reply to

    Re: Controlling external devices via puc

     

    Is that long ago that you got the PUCK codes flashed in your TV?
    If you do not have the lates revicion on the PUCK kod, you
    can you experience these problems.

    BeoVision 4 - 50 HD -  Beo5 - Beolab 5 - Beolab 7-1 - Beolab 6000 .

  • 10-21-2010 10:11 AM In reply to

    • Christer
    • Not Ranked
      Male
    • Joined on 01-18-2010
    • Stockholm
    • Posts 13
    • Silver Member

    Re: Controlling external devices via puc

    I think it is 6 month ago. I also have the same problem with controlling GEFEN.

    Work really good sometimes but it hardly repsonse other times.

    BV7-40 MK IV, BS/BM5, BL9, BL3, BL2

    BV10-32 MKII, BL11

    MAC MINI, TVIX, GEFEN, HUMAX, PS3

  • 10-21-2010 10:30 AM In reply to

    Re: Controlling external devices via puc

    Make sure you get your TV flashed with the latest version of the PUC tool in the B & O service tool MKII. I gote the same problem with the Humax HDPVR 1000C and Tvix 6500. After flash whit the latest PUC kode the problem is solved.

    BeoVision 4 - 50 HD -  Beo5 - Beolab 5 - Beolab 7-1 - Beolab 6000 .

Page 1 of 1 (4 items)