Hi Beoworld fellows

Just added a second hand Beovision 1 to my Masterlink system (as slave, option 6). In the system a BV7-MK3 is the video-master and a Beosound 4 the audio-master. Connected to the BV7 are a HDR2 and a Beomedia1. Slaves are BC6-23" and a BL2000.

Everything works fine, except for the "image" (main menu, photo, web, etc.) of the Beomedia 1 at the BV1 (this functions at the BC6). At the BV1 I can hear NMusic and NRadio, so signals to the Beomedia to start this service arrive. HDR functions fine (although displayed as V.Tape (in stead of V.Mem)).

Any ideas to get Beomedia fully working at the BV1?

Regards

MP

Sorry to say, but won`t work, because older Beovisions - MX, LX, AV9000, BV1...) don`t know the PC command. So you can`t access your BM1 from the BV1. There is a little workaround to get picture from BM1 on your BV1. If the BM1 is already activated from a linkroom, maybe BC6, and you have stored the link frequency to your BV1 TV channel 1, just press TV - 1, and you will see your BM1 picture. Unfortunately you have no control.

Stefan

Just a thought. If your BV7 MK3 is a 7-40 MK3 - BS3 based- with newer SW it should be possible to assign BM1 as V.AUX. V.AUX can be activated via BV1. Worth to check that - I never tried.

Stefan

Thanks Stefan

I'll try the work-around, but basically it is of limited use, since controlling won't happen anyway. At least I know the issue now and it will save me a lot of time.

And it is a BV7-32 - so there is no solution there.

MP