I have a Bv10-40 and would like to take an output from the tv and feed the sound into my amp so I can use my B&W speakers. but there is no output from the tv!

But what i  was thinkin was gettin a powerlink with 2 phonos on the opp end.

plug this into the tv and amp and then select a set of speakers on the sound setup of the tv and hope i get a an output.

regards

Chris

Sounds Heavenly do just the cable you need.

Powerlink to RCA

Craig

Or you can use the headphone output and connect to your amp via mini-jack>phono adaptor..

B&O part 6270302 plugged into an active PowerLink socket will do the trick just fine.