|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Latest post 06-07-2010 6:37 AM by bhollenberg. 6 replies.
-
06-07-2010 4:53 AM
|
|
-
bhollenberg
- Joined on 09-21-2009
- Amsterdam
- Posts 27
|
specifications BeoVision 7-40 Mark V
Hi Guys,
Does anyone know what the specifications are of the new BeoVision 7-40 Mark V?
Kind regards,
Bas
My Bang & Olufsen....
- BeoVision 7-40 MK V
- BeoSound 5
- BeoMaster 5
- BeoLab 6002 (2*)
- BeoLab 7-4
- BeoLab 4 (2*)
- BeoLab 11
- BeoCom 4
- Beo 5
|
|
-
-
Michael
- Joined on 05-20-2009
- Glen Waverley, Victoria, Australia
- Posts 245
|
Re: specifications BeoVision 7-40 Mark V
Hi Bas,
Is this the one you mean? http://www.bang-olufsen.com/specifications?productid=746
Michael.
|
|
-
-
Keith Saunders
- Joined on 04-16-2007
- Technical Advisor, Little Ann, Hampshire, UK
- Posts 3,810
|
Re: specifications BeoVision 7-40 Mark V
Bas,
The main specification areas are below:-
- DESIGNER is David Lewis
- DIMENSIONS are (W x H x D)/WEIGHT 108.0 x 68.0 x 18.0 cm + stand/45 kg 42.3" x 26.8" x 7.0" + stand approx. 99 lb
- COLOUR(S) Cabinet/Frame: Black/black, black/blue, black/dark grey, black/red, black/silver, black/golden, white/silver
- CONTRAST SCREEN Contrast screen with anti-reflection coating on both sides
- POWER CONSUMPTION EU: Typical: 202 W/Networked standby: 1 W US/Japan: Typical: 201 W/Networked standby: 0.9 W MAINS VOLTAGE RANGE EU: 200-240 V +10 / -15%, 50-60 Hz US/Japan 100-127 V +10 / -15%, 50-60 Hz
- THEFT PROTECTION FEATURE Pincode
- PICTURE FORMATS Format 1: 16:9 Panorama - 15:9 Panorama - 4:3, Format 2: Letterbox + Soft Scroll. Format 3: 16:9 Automatic format optimisation via "Black Bar Detection" 16:9 detection on all Scart connectors. Support of WSS (Wide Screen Signalling pulses) from broadcaster.
- HDMI INPUT FORMATS 480p,576p, 600p, 768p, 576i, 480i, 720p, 1080i, 1080p
- VGA INPUT FORMATS 60 Hz 640 × 480, 848 × 480, 1024 × 576, 800 × 600, 1024 × 768, 1366 × 768 and 1280 × 720
- DIGITAL SURROUND SOUND MODULE Standard built-in with SOUND INPUT FORMATS PCM, multichannel PCM Dolby Digital, Dolby Digital EX, DTS, DTS ES. Max 24 bit, 96 Khz
- DIGITAL SOUND DECODING CAPABILITIES Dolby Digital 5.1/EX 7.1, Dolby Pro Logic llx. DTS 5.1/ES 6.1/Neo:6 (US, Japan, KOR: AAC)
- SCREEN TYPE 40" 16:9 TFT LCD, glare surface
- BACK LIGHT TYPE Cold Cathode Fluorescent Lamp (CCFL)
- RESOLUTION 1920 x 1080 (Full HD)
- REFRESH RATE 200/240 Hz
- LUMINANCE OF WHITE (CENTRE OF SCREEN) Typical: 500 cd/m2
- CONTRAST RATIO at centre of screen Typical: 4000:1
- RESPONSE TIME (GREY TO GREY) Typical: 6 msec.
- VIEWING ANGLE +/-89 degrees both vertically and horizontally
- PICTURE OPTIMISATION VisionClear
- ROOM ADAPTATION Automatic Picture Control
- CONTRAST ENHANCEMENT Global backlight dimming
- MOTION PICTURE IMPROVEMENT Adaptive film judder compensation
- ANALOGUE TUNER VIDEO TYPE / FORMAT EU: Analogue: B/G/L/L/I/D/K PAL, SECAM (According to type and setup), NTSC on AV.
US/Japan/KOR: NTSC (M) FREQUENCY RANGE EU: 45 - 860 MHz: VHF, S-band, Hyper-band, UHF 99 programmes, auto tune, programme move and automatic naming US: Cable TV 1-125, Off Air TV 2-69 Japan: Channel 1-62 and Channel C13-C38
- ANALOGUE STEREO DECODING CAPABILITIES EU: A2 + Nicam Stereo US: BTSC Stereo, SAP Japan: EIA-J Stereo, AAC
- AERIAL INPUT CONNECTION(S) EU: TV: 1 x IEC-con female US/Japan/KOR: NTSC-M: 1 x F-con female
- DIGITAL TUNER T/C EU: Optional (DVB HD) US/Japan/KOR: Standard (ATCS module)
- VIDEO TYPE / FORMAT EU: DVB-HD module, DVB T/C, MPEG2/4, HD reception, EPG, Common Interface for Conditional Access and embedded CONAX (card pairing not supported) required for (de-)scrambling pay TV. US/Japan/KOR: ATSC Compliance ATSC A/53 rev. C, A/74 Mpeg2 (MP@ML (480P), MP@HL(720p, 1080i) ) Video formats all 18 according to ATSC A54a
- AUDIO TYPE / FORMAT EU: MPEG1, 2-channel audio decoder, layer 1 & 2 MPEG2, 2-channel audio decoder, layer 2
AAC, AAC+ AC3 decoding and down mix US/Japan/KOR: A (ATSC 052a) AC3 Stereo downmix Multichannel mode AC3 to S/P-DIF loop-through FREQUENCY, RANGE AND IF BANDWIDTH EU: 110 MHz to 862 MHz (Band 3, 4, 5) IF Bandwidth 6,7 & 8MHz selectable US/Japan/KOR: 54-806 MHz IF Bandwidth 6 MHz RASTER / FREQUENCY GRID EU: Special requirement for IT, TW and AUS US/J/KOR: COFDM (ORTHOGONAL FREQ. DIVISION MODULATION ) SPECTRUM EU: 2K & 8K, hierarchical and non hierarchical US/J/KOR:
- MODULATION EU: DVB-T: QPSK, 16QAM, 64QAM DVB-C: 4, 16, 64, 128, 256 QAM US/Japan/KOR: ATSC-T: 8VSB ATSC-C: 64QAM, 256QAM
- CODE RATE EU: 1/2, 2/3, 3/4, 5/6, 7/8 US/Japan/KOR:
- GUARD INTERVAL EU: 1/32, 1/16, 1/8, ¼ US/J/KOR:
- SYMBOL RATE EU: DVB-T: 2-45 msymb/sec DVB-C: 4.0-7.0 msymb/sec US/Japan/KOR: ATSC-T: 19,4 Mbit/sec ATSC-C: 5057 Msps (mode 1) or 5361 Msps (mode 2)
- AERIAL INPUT CONNECTION EU: DVB-HD (optional): 1 x IEC-con female Support of active aerial (DVB-T) 5V/50mA US/Japan/KOR:
ATSC:1 x F-con female
- USB EU: 1 x on the DVB-HD module (only for software update)
- ETHERNET EU:1 x RJ45 (software update)
- COMMON INTERFACE AND SMART CARD SLOTS EU: Common Interface according to EN50221 1x PCMCIA (Common Interface only)
Embedded CA: Conax (without Chip and Card paring), 1 Smart card slot connector All CA Systems available as common interface is supported CA power supply: 5V/500mA max.
- DIGITAL TUNER T/C/S2 EU: Optional US/KOR/Japan: Not available
- VIDEO TYPE / FORMAT DVB-HD T/C/S2 module, DVB T/C/S2, MPEG2/4, HD reception, EPG, Common Interface for Conditional Access and embedded CONAX (card pairing not supported) required for (de-)scrambling pay TV. AUDIO TYPE / FORMAT Mpeg1, Mpeg2, AAC, AAC+ and AC3 decoding and downmix FREQUENCY, RANGE AND IF BANDWIDTH S/S2: 10700-12750 MHz, IF Bandwidth 950-2150 MHz
T/C: 110 MHz to 862 MHz (Band 3, 4, 5) IF Bandwidth 6,7 & 8 MHz selectable Auto tuning 174-230 MHz and 470-858 MHz AERIAL INPUTS CONNECTION 1 x F-connector 1 x IEC-con female Support of active aerial (DVB-T) 5V/50mA ODU CONTROL DiSEqC 1.1
- USB USB 2.0 only for software update
- ETHERNET 1x RJ45 (for DVB-HD software update only)
- COMMON INTERFACE AND SMART CARD SLOTS Common Interface according to EN50221 1 x PCMCIA (Common Interface only)
Embedded CA: Conax (without Chip and Card pairing), 1 SmartCard slot connector All CA Systems available as common interface is supported CA power supply: 5 V/500 mA max.
- LOUDSPEAKER External (recommended: BeoLab 7-4 for centre or BeoLab 7-2 for stereo. Ordered separately)
|
|
-
-
bhollenberg
- Joined on 09-21-2009
- Amsterdam
- Posts 27
|
Re: specifications BeoVision 7-40 Mark V
Hi Michael,
That are still the specifications of the Mark IV, but this model will not be sold anymore........ (is told by my dealer in NL)
Kind regards.
Bas
My Bang & Olufsen....
- BeoVision 7-40 MK V
- BeoSound 5
- BeoMaster 5
- BeoLab 6002 (2*)
- BeoLab 7-4
- BeoLab 4 (2*)
- BeoLab 11
- BeoCom 4
- Beo 5
|
|
-
-
bhollenberg
- Joined on 09-21-2009
- Amsterdam
- Posts 27
|
Re: specifications BeoVision 7-40 Mark V
Hi Keith,
Thanks for the overview.
So the main difference is the Refresh Rate of 200/240 Hz and the contrast ratio of 4000:1, compared to the Mark IV?
Kind regards,
Bas
My Bang & Olufsen....
- BeoVision 7-40 MK V
- BeoSound 5
- BeoMaster 5
- BeoLab 6002 (2*)
- BeoLab 7-4
- BeoLab 4 (2*)
- BeoLab 11
- BeoCom 4
- Beo 5
|
|
-
-
Michael
- Joined on 05-20-2009
- Glen Waverley, Victoria, Australia
- Posts 245
|
Re: specifications BeoVision 7-40 Mark V
Sorry Bas. I just thought we had the latest info.
Apologies
Michael.
|
|
-
-
bhollenberg
- Joined on 09-21-2009
- Amsterdam
- Posts 27
|
Re: specifications BeoVision 7-40 Mark V
No worries!
My Bang & Olufsen....
- BeoVision 7-40 MK V
- BeoSound 5
- BeoMaster 5
- BeoLab 6002 (2*)
- BeoLab 7-4
- BeoLab 4 (2*)
- BeoLab 11
- BeoCom 4
- Beo 5
|
|
Page 1 of 1 (7 items)
|
|
|