in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 04-22-2010 9:15 AM by burantek. 6 replies.
Page 1 of 1 (7 items)
Sort Posts: Previous Next
  • 03-29-2010 8:17 PM

    Looking for Beomaster 3000-2 Type 2402 AND/OR BeoMaster 4400

    I am looking for aluminum slid rule 300-2 working or not to help make one good Beomaster Type 2402.

    And I would also like to buy a nice 4400 (higher power brother to the 3000-2) to power my Magnapan IIa speakers.

    Ready to BUY!!!

  • 03-29-2010 9:34 PM In reply to

    • Evan
    • Top 25 Contributor
      Male
    • Joined on 12-15-2008
    • Ohio | USA
    • Posts 2,601
    • Gold Member

    Re: Looking for Beomaster 3000-2 Type 2402 AND/OR BeoMaster 4400

    I believe I saw a 3000-2 on US Ebay. Dont recall the type, give it a search.

    Evan

     

  • 03-31-2010 9:06 AM In reply to

    Re: Looking for Beomaster 3000-2 Type 2402 AND/OR BeoMaster 4400

    Dan,

    I have both available in the states...

    Though my 3000 is the 2405... as you may recall from pictures in your other thread RE: wiring.

    LMK if you have any interest, and I can email you with details.

    Regards,

    • B&o bottle opener
  • 04-01-2010 5:29 PM In reply to

    Re: Looking for Beomaster 3000-2 Type 2402 AND/OR BeoMaster 4400

    Thanks for the reply. You certainly are a wealth of info and also B&O equipment as well it looks like...

    I bought an old 300-2 Type 2402 on eBay for $140 and I am going to make one good working unit with it.

    I am still interested in the 4400 as it is more powerful and I am concerned about the 3000-2 driving magnapan IIa electrostaitic loudspeakers which are rated at 40 - 200 watts @ 8 ohms.

    That said, do you have a price in mind for the 4400? Would like to see if it is affordable to my budget before asking for pcs, info, etc.

    Thanks again!

  • 04-01-2010 9:57 PM In reply to

    Re: Looking for Beomaster 3000-2 Type 2402 AND/OR BeoMaster 4400

    Dan,

    The price of my BM3000-2405 is pro bono BeoWorld.

    It is project level... and a project I don't see me getting to in the near future! Yours for the cost of shipping if you want it.

    4400... I have several and need to regroup as they are at different addresses... so it won't be until at least this weekend.

    Let me see what I have and I'll email you w/ an evaluation! Big Smile

    • B&o bottle opener
  • 04-21-2010 4:51 PM In reply to

    Re: Looking for Beomaster 3000-2 Type 2402 AND/OR BeoMaster 4400

    Hello. Don't mean to hassle you and I realize you may not have gotten around to it yet, but I am still interested in buying the 4400 from you if you have a working unit.

    I have two dead, open 3000-2 Type 2402s sitting on my desk here with a beogram 4004 and some nice speakers out in my greeting area without any receiver.

    I should do something, and getting a 4400 seems to make the most sense.

    In the mean time, I have ordered a complete capacitor kit from a fellow beoworld member and I will be able to replace all of the electrolytics on my 3000-2 but I may just use that in my office here and use the 4400 out in my lobby with the big speakers.

  • 04-22-2010 9:15 AM In reply to

    Re: Looking for Beomaster 3000-2 Type 2402 AND/OR BeoMaster 4400

    Dan,

    No hassle at all. I didn't "completely" forget about you Embarrassed -just been swamped.

    I will email you tonight w/ details.

    Do you still have an interest in a SPARES/REPAIR 3000?

    • B&o bottle opener
Page 1 of 1 (7 items)