in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 01-01-2010 4:57 PM by tompa. 1 replies.
Page 1 of 1 (2 items)
Sort Posts: Previous Next
  • 12-29-2009 1:00 PM

    • k984942
    • Top 500 Contributor
      Male
    • Joined on 11-10-2008
    • London, UK
    • Posts 194
    • Bronze Member

    ML CI Error?

    Any ideas what a 'CI' error is?

     

    My Avant is reporting this in the 'Monitor Information' section of the service menu

     

    Thanks

     

    32" RF VCR Avant, 2 x 28" VCR Avant, DVD1, Beocom 6000, Beo5, A9 Keyring!

     

  • 01-01-2010 4:57 PM In reply to

    • tompa
    • Top 500 Contributor
    • Joined on 06-30-2007
    • Sweden
    • Posts 94
    • Bronze Member

    Re: ML CI Error?

    That meens that ML bus have Adress conflicts, but first press go in servicemenu there you see errorcodes and then go in monitor again if ML CI is still there ,pull out Masterlink cable and press go in monitor menu again, if it still there you have the fail inside tv set,and  in most cases ML interface IC is failing (do to lightning or other power failure)

     if error gone, you have to disconnect all linkproducts and connect one by one to see wich is fail and sometimes it works then you have connect all tlinkproducts again

     

    Regards

    Tomas

     

Page 1 of 1 (2 items)