Beosystem 6500 in white - No sound - (-: Error found and works again -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 10-16-2009 5:51 PM by Medogsfat. 6 replies.

Page 1 of 1 (7 items)
	Sort Posts: Previous Next

10-07-2009 12:50 PM

BegBeo
Joined on 04-23-2008
Stockholm - Sweden
Posts 60

Beosystem 6500 in white - No sound - (-: Error found and works again

Reply Contact

I have a Beosystem 6500 in white, from Beogram record deck, no sound, I raised to max volume but the speakers are just very little noise. Could it be that the RIAA the power amplifier is faulty sitting in 6500?

Grateful for the help

best regards

Jan

10-07-2009 3:08 PM In reply to

Medogsfat
Joined on 02-21-2007
*Moderator* Leeds, Yorkshire
Posts 4,045

Re: Beosystem 6500 in white - No sound

Reply Contact

If you get sound from other sources then I would guess you are right - either that or the cartridge is goosed on both channels.

Chris.

The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.

10-07-2009 3:55 PM In reply to

BegBeo
Joined on 04-23-2008
Stockholm - Sweden
Posts 60

Re: Beosystem 6500 in white - No sound

Reply Contact

Thank you for your reply Chris, I'll try tomorrow with another mmc4 from a Beogram 5500 if the 6500 works so you're right. I tell you more tomorrow.

Regards Jan

10-08-2009 3:20 PM In reply to

BegBeo
Joined on 04-23-2008
Stockholm - Sweden
Posts 60

Re: Beosystem 6500 in white - No sound

Reply Contact

Hi Chris, I tried today with one mmc4 and one mmc2 that works on a Beogram 5500 without any problems but not on BG6500 same thing very very little sound in the speakers. I tried also to connect to aux input but also with no sound. What you think ??????

Regards Jan

10-09-2009 3:41 PM In reply to

Medogsfat
Joined on 02-21-2007
*Moderator* Leeds, Yorkshire
Posts 4,045

Re: Beosystem 6500 in white - No sound

Reply Contact

It sounds like the RIAA has been disconnected or even removed for the Beogram. Do you have another Beomaster such as a BM5500 to try the Beogram 6500 with? This should tell you if the problem lies with the Beogram or not. If it plays normally then the RIAA has been disconnected, if you get distorted noise then the RIAA is still connected and there is a problem with the phono input of your Beomaster 6500.

Chris.

The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.

10-16-2009 3:50 PM In reply to

BegBeo
Joined on 04-23-2008
Stockholm - Sweden
Posts 60

Re: Beosystem 6500 in white - No sound

Reply Contact

Hi Chris, sometimes it's a small error and we believe that there is a large
error and begin troubleshooting the wrong place. Now I have found the error
cable had Losne look at the attached picture, after I soldered everything
The player worked without any problems.

Today I had another happy day,

I received a Beogram 9500 with a MMC1 in very good condition, Beocenter 9500 and

a couple Beovox 7000 in white, I think it is very rare in white.

Regards Jan

10-16-2009 5:51 PM In reply to

Medogsfat
Joined on 02-21-2007
*Moderator* Leeds, Yorkshire
Posts 4,045

Re: Beosystem 6500 in white - No sound

Reply Contact

Happy days Jan Big Smile

I really should have thought about the DIN plug being a problem as it is quite common for the plugs on Beograms failing due to the tight angle in which they fit into the Beomasters - Doh! In my own defence though, the fact that you got any sond at all threw me slightly away from this.

Glad everything is now OK and well done on your latest aquisitions, some really nice items.

Chris.

The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.

Page 1 of 1 (7 items)