Beocenter 9000 cd-panel failure -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 10-07-2009 4:21 AM by Vandelay. 5 replies.

Page 1 of 1 (6 items)
	Sort Posts: Previous Next

09-27-2009 1:56 PM

Vandelay
Joined on 07-18-2008
Posts 16

Beocenter 9000 cd-panel failure

Reply Contact

The sliding panel on my bc:s cd-side doesn´t close completely anymore. The servomotor runs nicely ,but the door gets stuck in about 4/5 closed. Also the closing isn´t so smooth anymore.

If anyone has had a similar problem please advice me what has to be done to fix it.

Thanks!

09-28-2009 2:14 AM In reply to

reto180573
Joined on 03-13-2008
Posts 1

Re: Beocenter 9000 cd-panel failure

Reply Contact

I had the same problem with my 9300.

Change the two drive belts cost about 2$, and clean the slide rail.

Reto

09-28-2009 3:00 AM In reply to

Vandelay
Joined on 07-18-2008
Posts 16

Re: Beocenter 9000 cd-panel failure

Reply Contact

Thanks Reto!

Where can I buy the belts?

09-28-2009 3:25 AM In reply to

Vandelay
Joined on 07-18-2008
Posts 16

Re: Beocenter 9000 cd-panel failure

Reply Contact

Thanks Reto!

Where can I buy the belts?

09-30-2009 2:05 PM In reply to

BegBeo
Joined on 04-23-2008
Stockholm - Sweden
Posts 60

Re: Beocenter 9000 cd-panel failure

Reply Contact

You can buy the belts här: www.blservice.se

Rgards Jan

10-07-2009 4:21 AM In reply to

Vandelay
Joined on 07-18-2008
Posts 16

Re: Beocenter 9000 cd-panel failure

Reply Contact

Tack så mycket Jan

Page 1 of 1 (6 items)