I have an LC1 and would like to know how to set it up to use with the BEO4 I can turn the light on with the remote and adjust the intensity up and down of the light in question via the LC1.  However other then using my A* key ring how do I turn the LC1 off with the BEO4 remote???

Also is it possible to set the light intensity to a predetermined level so that it always turns on tho that setting via the BEO4??.  If so how does this work programming wise via the Beo4 remote???

THANX!!!!

Is simples
Light, Stop.

Andy T.

I faced the same situation recently.

I just whipped out my ol Beolink 1000 terminal and shift-link-go to- (lamp number) and store.

Barry

LIGHT STOP to turn off the light.

LIGHT LIGHT (or LIGHT GO) to turn on the light, full power.

LIGHT plus a NUMBER, to turn on the light at a certain intensity.

You can program that intensity, by doing LIGHT, LIST, SETUP... you need to download the user guide to see exactly.

You can find a version of the LC2 user guide here:

http://www.bang-olufsen.com/user-guides?cat=BeoLink&prodid=106&typeid=1

They work approximately the same. Except that for the LC1 you need to key in a number before you can change the intensity by using the UP and DOWN.

p.