I have upgraded my old dvd-player with a Philips BDP7200 Blu-Ray disc player, but unfortunaly theres no contact between the tv and the player. I use a video+audio to scart cable and have a Samsung DTB-H380Z between the player and the tv. I took both the player and the DTB to service to tjek if the video rca-contact was enabled, witch it was. I've even tried to connect the player directly into the tv with no luck (the same setup as with my old dvdplayer).

Since I have bought the tv on the secondhand-market without a usermanual, I have trouble to understand why some of the functions on the Beolink 1000 remote control doesn't seem not to work: forexample neither the AV-button , nor the menu button react when pushed. Don't know if its because of the limited functions of the model or mail-functions in the controller.

Is it just so, the tv is to old to work with a Blu-Ray player, or are there something I could have done wrong?

The Samsung remote should eventually work as a multi-controller and there are some codes to B&O (324 and 483) but nothing happens. Can there be other codes to older models or is the model just to old to work with the Samsung DTB?

It should be fine - Have you enabled the socket? The user manual is on here by the way - I would tend to use a SCART cable if possible though. The MS6000 uses Beo4 codes.

Hey Peter

Thanks for replying so fast!

Yes, the manufactor tjecked the socket. I also did a phonecall to B&O, who confirmed that the setup should be fine. But it was first when I contacted Philips, I found the missing link. It seems that in the case of the Philips BDP7200, the machine can't handle a audio/video(red,white,yellow-socket) to scart cable. So I probably have to return the Samsung DTB to the dealer and exchance it with a Grundig with audio/video in (and then hope the Grundig DTB can handle the the signal to the tv via scart...) ...or return the blu-ray or buy a newer tv...