Hi, have recently purchased Beosound 5 - could not have installed it without reviewing the very helpful posts here in Beoworld !

So, a question from me:

When i try to move back and forward tracks from by pressing up and down on the Beo4 it moves 2 tracks at a time - seems quite odd?  Any suggestions appreciated

Pete

you are pressing one button, but the signal is received by two IR-eyes.

Depending of your system you'll have to adjust the options.

Agree! What else is in the room? I imagine the TV? How are your speakers attached? If to the BS5, you need both devices to be option 1 but if the speakers are attached to the TV, you need the TV to be option 2 and the BS5 option 0. Do you know how to option set?

Peter, Spot on. BV5 in the same room. Speakers attached to the TV. I have got the BS5 to Option 0, but how do I set the TV option?

With the Beo4, press:

LIST and the red button.

Press LIST till OPTION? appears on the screen.

Press GO

Press LIST til V.OPT appears and then press 2.

Audio option setting is the same except you select A.Opt obviously.