in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 04-05-2008 4:19 AM by joeyboygolf. 9 replies.
Page 1 of 1 (10 items)
Sort Posts: Previous Next
  • 06-02-2007 3:55 AM

    "Old" Beo4 and A Mem

    Any one know how you achieve A Mem on an old Beo4?

    Regards Graham

    Filed under:
  • 06-02-2007 4:02 AM In reply to

    Re: "Old" Beo4 and A Mem

    Sorry, got it. SHIFT / A TAPE

    Your technical advisor was having a Saturday morning moment!!!!Sleep

    Regards Graham

  • 06-02-2007 4:53 AM In reply to

    Re: "Old" Beo4 and A Mem

    Isn't A.MEM the same as A.Tape. I thought SHIFT, A.TAPE was A.TAPE2?
  • 06-02-2007 7:51 AM In reply to

    Re: "Old" Beo4 and A Mem

    Quite correct Peter, just wanted to see if you were concentrating!Wink

    Regards Graham

  • 04-04-2008 6:31 PM In reply to

    Re: "Old" Beo4 and A Mem

    Hi Graham...

    There is no "shift" on the beo4 i've got here.......

    How do i get there??

    gracias..

  • 04-04-2008 7:09 PM In reply to

    • Jandyt
    • Top 10 Contributor
      Male
    • Joined on 04-01-2007
    • Clitheroe, Lancashire, UK
    • Posts 13,004
    • Founder

    Re: "Old" Beo4 and A Mem

    Keith, do you know how to 'ADD' to your list?

    Poor me, never win owt!

  • 04-04-2008 9:01 PM In reply to

    Re: "Old" Beo4 and A Mem

    Hi Andy...

    Well i read the manual...for the BEO4....but never done it..

    So...  Hold down the (RED DOT) and LIST ....then...release both....then

    press LIST until i see ADD?........then....(this is where i get lost)...

    Would really appreciate the rest to get to "SHIFT"...and how to use it to go into TEST MODE for a BS 9000..

    gracias!!

  • 04-05-2008 4:14 AM In reply to

    • Jandyt
    • Top 10 Contributor
      Male
    • Joined on 04-01-2007
    • Clitheroe, Lancashire, UK
    • Posts 13,004
    • Founder

    Re: "Old" Beo4 and A Mem

    Hi Keith,
    once you see 'ADD', press 'GO' then list intil you see what you want to add, in your case, 'SHIFT'
    You can now either press 'GO' and shift will be first on your new list,  or a number eg 3 and 'Shift' will be third on your new list.
    Hope this helps.

    Andy T.

    Poor me, never win owt!

  • 04-05-2008 4:19 AM In reply to

    Re: "Old" Beo4 and A Mem

    Now you know why most B&O engineers carry a Beolink 1000 and I have one on my workbench!!

    Regards Graham

Page 1 of 1 (10 items)