Is there a difference between SW 5.02a (which I have) and 5.08a ? And if so, what difference is there / which issue's should 5.08a solve?

(it's the SW of a BV7-40 mkIII)

Keith Saunders:

The following problems are fixed with software version 5.08:-

• TV switches off, if two-way IR products are used in the same room.
• Speaker mode changes when changing channel, seen on DVB-HD and external STB
• Clicking noise from centre/front speaker when changing channel on an external set-top box connected by HDMI/SPDIF, after updating to software version 5.02
• No video on built-in DVD after software update 5.02 (US version only)
• Not possible to change Region code on DVD
• Switching to built-in DVB-T/S picture format is locked to format 3, until the next time the channel is changed.
• From standby, picture format from internal DVB module cannot be changed. Locked to last shown format from before standby.
• If DVD loader is opened twice in standby, it might take up to three attempts to play a DVD when selected
• STB connected via HDMI is not always switched off.
• STB connected with HDMI and SCART/CVBS cannot be controlled in a link room if main room TV is switched off
• Error message with SKY HD box in link room, if main room TV is switched off

Thanks Quim!