|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Latest post 07-06-2007 4:42 AM by kawo. 77 replies.
-
-
Wings
- Joined on 04-17-2007
- Hong Kong
- Posts 341
|
Re: User and Service manuals
I would be grateful for a copy of the service manual for the Beolab 2500 (if one is available). Thanks in advance.
|
|
-
-
wirralsimon
- Joined on 04-17-2007
- Birkenhead, UK
- Posts 1,253
|
Re: User and Service manuals
Peter: wirralsimon: Hi I am looking for a service guide to the BeoCenter 2000. Not a classic by any means but it came effectively free with a pair of S45-2's on the original stands that I bought for £16 on ebay. The problem I have is that it is effectively mono (The sound out of each of the four speakers is the same) and I would like to see the service manual before I start investigating/dismantling. Simon
I'll see if I can locate one though these are odd machines as they are actually Japanese. Not as serviceable as some I am afraid.
I don't need this now! I opened up the back of the unit and a quick poke around revealed the problem. The right hand channel on the amp has ceased functioning and a previous owner has soldered wire across from the LHS to the RHS so that the working channel was being played through both left and right speakers! Given that it's in poor condition, not working and far from a classic I shall be raiding it for useful parts (mainly from the turntable) and throwing it in the skip! Simon
|
|
-
-
Thomas
- Joined on 04-16-2007
- Norway
- Posts 85
|
Re: User and Service manuals
Hi, Anyone have the service manual for the Beo4 ? Thomas
7-40 Mk3, Beo5/Beo4, Avant32DVD, BS3K, PentaIII, BL4K, BL Active w/BL2500, Avant28CTV,Beoport, AppleTV, 2xBC6K
|
|
-
-
Stonk
- Joined on 04-16-2007
- Marlow, Bucks, UK
- Posts 1,688
|
Re: User and Service manuals
Wings: I would be grateful for a copy of the service manual for the Beolab 2500 (if one is available). Thanks in advance.
I had a look. Seems I have everything but! EDIT: I have found quite a thick Beosystem 2500 Circuit Description manual and in there it has a section on the Beolab 2500 showing block descriptions & detailed diagram info. No exploded views or disassembly though!
If you think nobody cares, try missing a couple of payments.
|
|
-
-
Wings
- Joined on 04-17-2007
- Hong Kong
- Posts 341
|
Re: User and Service manuals
Hi, Stonk. Thanks for looking.
|
|
-
-
samueljoachim
- Joined on 04-17-2007
- Bristol, UK
- Posts 42
|
Re: User and Service manuals
Stonk: samueljoachim: Hi, I'm after the Beolab 5000 Loudspeaker Service Manual if such a thing exists? Cheers
I have one of those....but only the original not an electronic scanned version.
Would there be any chance of scanning it? :D Many Thanks
Joachim
|
|
-
-
h1npw
- Joined on 04-16-2007
- A cricket ball throw from Trent Bridge
- Posts 776
|
Re: User and Service manuals
I'm sure I've got one somewhere............will have a look tonight. Cheers Nigel
|
|
-
-
joeyboygolf
- Joined on 04-16-2007
- Ely, Cambridgeshire, UK
- Posts 3,252
|
Re: User and Service manuals
Hi Nigel, If you have a scanned copy then can I have one? Pleeeeease
|
|
-
-
h1npw
- Joined on 04-16-2007
- A cricket ball throw from Trent Bridge
- Posts 776
|
Re: User and Service manuals
How much discount will it get me off an MCP 6500 ? ! Only joking I'll have a good rumage .........
|
|
-
-
-
Lou Ambaum
- Joined on 04-16-2007
- Netherlands
- Posts 3
|
Re: User and Service manuals
Hi Peter, Just in section manuals is fine. Please also create "view entire manual range" as in the product section is! Regards, Lou
|
|
-
-
Peter
- Joined on 02-12-2007
- Posts 9,572
|
Re: User and Service manuals
SteveB: Peter: SteveB: Any chance of adding the PCG (Product configuration Guide) software, this was available on the old CC Cheers Steve
I am sure we will - It is on my list of things to add! Where do you think would be a good place to put it?
Hi Peter, Difficult under the current structure of user and service manuals (Which works very well by the way) It was always a little tricky to find under the old site. Maybe we need a new category under 'products' for software as it soes not naturally fall under the service manual heading Steve ps in the meantime any chance of mailing it to me
Tried adding it as a manual - no joy (hope I have not crashed anything Lee!) - PM me with your email and I will send it. It is an exe file so make sure your email doesn't mind these! We will put it on site - ? Beotech when possible.
|
|
-
-
Puncher
- Joined on 03-27-2007
- Nr. Durham, NE England.
- Posts 9,588
|
Re: User and Service manuals
Peter: SteveB: Peter: SteveB: Any chance of adding the PCG (Product configuration Guide) software, this was available on the old CC Cheers Steve
I am sure we will - It is on my list of things to add! Where do you think would be a good place to put it?
Hi Peter, Difficult under the current structure of user and service manuals (Which works very well by the way) It was always a little tricky to find under the old site. Maybe we need a new category under 'products' for software as it soes not naturally fall under the service manual heading Steve ps in the meantime any chance of mailing it to me
Tried adding it as a manual - no joy (hope I have not crashed anything Lee!) - PM me with your email and I will send it. It is an exe file so make sure your email doesn't mind these! We will put it on site - ? Beotech when possible.
Wil it save if it is zipped?? Also you can try amending the file extension (to *.pdf fro example). Sometimes this is enough. The downloader then just needs to rename to *.exe and everything will be fine.
Generally speaking, you aren't learning much if your lips are moving.
|
|
-
-
Corvin
- Joined on 04-16-2007
- Australia
- Posts 124
|
Re: User and Service manuals
I have been after this config software also, would apreciate an email too. Please
|
|
-
-
Emmanuel92
- Joined on 02-14-2007
- Paris
- Posts 2,032
|
Re: User and Service manuals
Hi all, Tonio18 is looking for the French version of the BeoSystem 4500 manual... Is there someone who has it ? Thanks in advance.
Quoi de mieux qu'un BeoLab 2 ? 2 BeoLab 2 !
|
|
-
-
Stonk
- Joined on 04-16-2007
- Marlow, Bucks, UK
- Posts 1,688
|
Re: User and Service manuals
Most manuals are multi lingual and I'm sure the BS4500 manuals are in English, German, French & Danish. Peter is putting then on soon so have a look.
If you think nobody cares, try missing a couple of payments.
|
|
-
-
Emmanuel92
- Joined on 02-14-2007
- Paris
- Posts 2,032
|
Re: User and Service manuals
Stonk: Most manuals are multi lingual and I'm sure the BS4500 manuals are in English, German, French & Danish.
OK, Tonio18 will wait for the French version to appear. Thanks.
Quoi de mieux qu'un BeoLab 2 ? 2 BeoLab 2 !
|
|
-
-
Peter
- Joined on 02-12-2007
- Posts 9,572
|
Re: User and Service manuals
I have put the French manual on site under the Beomaster 4500 - User manual - French.
|
|
-
-
Peter
- Joined on 02-12-2007
- Posts 9,572
|
Re: User and Service manuals
Puncher: Peter: SteveB: Peter: SteveB: Any chance of adding the PCG (Product configuration Guide) software, this was available on the old CC Cheers Steve
I am sure we will - It is on my list of things to add! Where do you think would be a good place to put it?
Hi Peter, Difficult under the current structure of user and service manuals (Which works very well by the way) It was always a little tricky to find under the old site. Maybe we need a new category under 'products' for software as it soes not naturally fall under the service manual heading Steve ps in the meantime any chance of mailing it to me
Tried adding it as a manual - no joy (hope I have not crashed anything Lee!) - PM me with your email and I will send it. It is an exe file so make sure your email doesn't mind these! We will put it on site - ? Beotech when possible.
Wil it save if it is zipped?? Also you can try amending the file extension (to *.pdf fro example). Sometimes this is enough. The downloader then just needs to rename to *.exe and everything will be fine.
I am trying that!! Nice thought!
|
|
-
-
Peter
- Joined on 02-12-2007
- Posts 9,572
|
Re: User and Service manuals
Puncher - you are a genius! Gold members can now try to download this at Products/Music Systems/Beolink Products/ Product Configuration Guide. Go to the User and service manual bit and then as above. remember to change the last three letters from pdf to exe. can someone let me know if it works! I am on a Mac and it will not work on one of those!
|
|
-
-
h1npw
- Joined on 04-16-2007
- A cricket ball throw from Trent Bridge
- Posts 776
|
OK Remember your talking to a complete and utter technophobe who does not understand computers...... I have a scanned (into a word document) copy of a CDX users manual. the file size is huge - 19,000 KB. My secretary does not know how to compress / zip this file to make it any smaller and I certainly don't. Don't know if I'll be able to email this because of the file size, but I'm willing to give it a go. Graham & Benkap - can you email me your email address and I'll give ti a go Cheers Nigel
|
|
-
-
-
h1npw
- Joined on 04-16-2007
- A cricket ball throw from Trent Bridge
- Posts 776
|
Went to see my I.T. boys...I've sent you 2 emails - one slightly squashed and one very squashed.... Our Lotus Notes at work is playing up something rotten anyway so it will take a while to come through. Let me know what you receive Cheers Nigel
|
|
-
-
-
Emmanuel92
- Joined on 02-14-2007
- Paris
- Posts 2,032
|
Re: User and Service manuals
Peter: I have put the French manual on site under the Beomaster 4500 - User manual - French.
Many thanks Peter ! EDIT: Tonio18 is very grateful.
Quoi de mieux qu'un BeoLab 2 ? 2 BeoLab 2 !
|
|
|
|
|