Hi,i have seen a  picture of a Beomaster 1200 mounted on a wall,does anybody know how this is done? there are two stands underneath the BM ,ment for tilting  it slightly forward,is it ment to hang from these evenualy from some of the skrews in the chassis?ore did it come whit some kind of  custom wallmount from B&O

Jon

You need a wallmount. Don't try to hang it on the stands, as this will certainly break them!

I owned several 1001s (thats the FM-only version of the 1200) and once made a custom wallmount for one of these.

It's not that hard; you just need four pieces of metal to screw on the chassis and the correspondent mountings on the wall.

I never owned an original wallmount of this type myself but I believe it is
more or less a flat metal plate, bolted to the wall.
The Beomaster grips the plate using the little grooves on the sides of
it's square plastic feet. It's hung on the plate like a painting on a nail in
the wall.

Martin

Ok,thanks , a sheetmetal mounting bracket sounds like a good idea and, its easy to make,now my only problem is to find 90 degre angeled 5 and 2 pin Din plugs to awoid the speaker and signalkabels sticking upp from the BM.

Jon

Hi!

My first piece of B&O was a beautiful BM1200, which came with original BV1200 speakers and... the original wallmount thingy! Only 35 euro's

It is a metal frame that slides into the little slots in the rubber/plastic paws (good english?) that are used when standing horizontal, flat on the table.

On this frame you can click a silver/alu colored brace-something that will hide the cables out of sight.

I'll try and make a picture of it if you like, the beomaster is at my mother's house right now so might take a while.

A sheetmetal plate that slides into the little slots should do the trick too, maybe even better.

Hi,a picture would be very helpfull, maybe i can make a copy of the original wallmount,in brushed or polished stainless steel

Jon

Pics of the wallmount system, for future reference:

http://forum.beoworld.org/forums/p/33237/274828.aspx

Premiumverum:

Pics of the wallmount system, for future reference:

http://forum.beoworld.org/forums/p/33237/274828.aspx

The one in this topic is for BeoMaster 1001. This is the same wallmount, the difference is that the topplate for BeoMaster 1200 is grey. I have seen the original one for BeoMaster 1200 somewhere in the north of the Netherlands and the original one for BeoMaster 1001 is still new in the box at my home.......