Hi,

I want to renew the cable going from the beogram 4500 to the amplifier.

 on the end of the Riaa amplifier, i have 6 wires

from top to bottom, i have

a white wire

a shield

a shield 

a black wire

a red wire

a yellow wire

could some one tell me  wich pin corresponds at the  7 pins DIN plug ? 

i have loaded a photo under    http://theoz.free.fr/IMG_0004.jpg

Many thanks for your help

Théo

Hi Theo,

             as a gold member you can download the service manual from the main site products page.  

Chris.

Hi Chris,

I have it, but i down't really understand  the diagram

if someone could help

 http://theoz.free.fr/BG4500-diagram.jpg

thanks

Theo

Hi all,

No one has an idea of what comes out (in wich order)  from an Riaa preamp located in some Beograms ?

Thanks for your help

Theo

Here's a picture of mine

Menahem

I guess I haven't figured out how to attach pictures from my hard disk (not from a Web URL) in the new message format.

If someone would be kind enough to explain this to me, I'd be happy to paste this picture.

Hi

DIN pin 7 = yellow (datalink)

DIN pin 3 = white (Lch)

DIN pin 5 = red (Rch)

DIN pin 2 = shields from the white and red

DIN shield cover = black (system ground)

Check the old cable with ohm meter to figure the pins out and the colors of the cables.

/Fredrik

Hi,

Thanks for your reply, but i knew this.

My problem is where goes the yellow on the Riaa preamp, and the white, .....

on the riaa preamp, there are 6 soldering

Thanks

Theo

Hi Theo,

As I said before, I have a picture of mine, but I cannot determine how to post pictures on the new website.

Reply to me with your email, and I'll send you the picture directly to your email.

Menahem

Hi,

Hi,

Many thanks Menahem. That's what i need.

But, all cables don't have the same wiring.

I bought an official B&O audio cable (7 pins, with 2 i can unscrew) some months ago, and the colors are not all the same.

I'll look at this next week-end, and i'll come back for the results.

Thanks again

Théo