Apart from an MX5500 what will the Motorized stand fit? Without changing the top plate. All I could think of was an MX5000.

Craig

 Hi,

the motor itself will fit to all MX and LX tv sets, but not for MX8000 and MX4200.

There are 3 plates: LX, MX 28" and MX 21". So the MX5500 plate will fit to all 28" MX4500-5000-5500-6000-7000-8000.

The stand is more or less universal, it will fit to all modells. But i would not use the smaller MX3000 stand for a wide LX5500... There a some differences in hight, wide and the material. There is the old steel ST5000 and alumenum types 4106/4107.

 Martin

Die_Bogener:

 

 Hi,

the motor itself will fit to all MX and LX tv sets, but not for MX8000 and MX4200.

There are 3 plates: LX, MX 28" and MX 21". So the MX5500 plate will fit to all 28" MX4500-5000-5500-6000-7000-8000.

The stand is more or less universal, it will fit to all modells. But i would not use the smaller MX3000 stand for a wide LX5500... There a some differences in hight, wide and the material. There is the old steel ST5000 and alumenum types 4106/4107.

 Martin

Thanks for the reply Martin. So if I understand you correctly my stand will fit MX4500-5000-5500-6000-7000. It has a 4 pin DIN type connection.

Once again thanks Martin.

Craig